Z4 M Skid Plates

mishaalt · 06-17-2008, 05:43 PM

I have called RPI and talked to them regarding the skid plates, they told me that they were machined for the Z4 M Coupe.

Will they fit on a 2007 Z4 M Roadster, I have called BMW parts and they have been unable to tell me if the coupe and Roadster use the same front bumpers.

Thanks in advance for any responses.

MT

wrh3 · 06-17-2008, 05:52 PM

I always thought the bumper on the M coupe and roadster were the same? I think they should work, you can go to http://www.realoem.com/bmw/select.do and verify that the part numbers are the same.

mPlasticDesign · 06-17-2008, 06:16 PM

Quote:

Originally Posted by wrh3

I always thought the bumper on the M coupe and roadster were the same? I think they should work, you can go to http://www.realoem.com/bmw/select.do and verify that the part numbers are the same.

I have checked this before, the bumpers themselves have different part #'s, why? dunno?

mishaalt · 06-18-2008, 09:48 AM

Thanks for the information.

OEM has them as different part numbers but are they the same bumper? I want to make sure all the bolt holes will align with the skid plated.

wrh3 · 06-18-2008, 09:55 AM

Take a look at these pics from my M Coupe and see what you think, do you have two screws in the same place for mounting the skid plate:

Black///Mamba · 06-18-2008, 10:17 AM

i have a Roadster and ordered the plates and they just arrived. I will install them today after work and let you know if it works or not.

I have already slightly scuffed up the fangs (DOH!) anything i can do to repair the damage? I hate having nice things sometimes, makes it so sad when you mess them up.

wasupdu · 06-18-2008, 02:00 PM

Quote:

Originally Posted by Black///M

I hate having nice things sometimes, makes it so sad when you mess them up.

I couldn't agree more. That's why I was actually happy when i got my first noticeable scratch on my Z4 and 5er (well, noticeable to me at least

). After that, I became a lot less paranoid.

Black///Mamba · 06-18-2008, 02:47 PM

Quote:

Originally Posted by wasupdu

I couldn't agree more. That's why I was actually happy when i got my first noticeable scratch on my Z4 and 5er (well, noticeable to me at least

). After that, I became a lot less paranoid.

yep, like i said in another post. with cars, its more about the overal then the specifics. if you are going to cry over every little ding and scratch you get, you might as well not buy a nice car. going speeds of 60+ with small rocks and pebbles on the ground, there is no way to prevent damage. Having to park in parking lots with inconsiderate morons, there is no way to prevent damage.

I've calmed a lot over the years, as before I used to freak out over everything.

mishaalt · 06-19-2008, 04:13 PM

wrh3- thanks for the pics, I will check and see if the bolt holes look similar.

Black///M- Did they fit on your roadster? Depending on the damage the fangs can be repaired. My body shop is able to lightly sand down the area and paint before I put on the skid plates.

chris719 · 06-25-2008, 08:49 PM

Also interested if they fit the roadster...

Black///Mamba · 06-26-2008, 07:57 AM

sorry guys, i have been super busy as of late. work has been hectic since its the quarter end. i will try and do this today after work and let you all know.

mishaalt · 07-09-2008, 01:00 PM

Black///M any luck getting them on? Thanks, MT

Black///Mamba · 09-04-2008, 07:27 PM

oh btw, forgot to respond. the plates fit fine.

AtoB · 09-04-2008, 07:49 PM

Quote:

Originally Posted by wrh3

Take a look at these pics from my M Coupe and see what you think, do you have two screws in the same place for mounting the skid plate:

i had them... when i did scrap my fangs... these plates actually (IMO) made the situation worse.. the edge of the plate caught, and then caused the fangs to bend, and crazed the paint... if i hadn't had the RPI skid plate i know i would have scraped the underside of the spoiler... but it most likely would not have pulled and ruined the paint.... cost me over $700 to repaint... i took the plates off the next day and tossed them into the trash. i don;t recommend them.... obviously... just thought you should know.

MMMazing07 · 09-04-2008, 09:26 PM

Quote:

Originally Posted by AtoB

i had them... when i did scrap my fangs... these plates actually (IMO) made the situation worse.. the edge of the plate caught, and then caused the fangs to bend, and crazed the paint... if i hadn't had the RPI skid plate i know i would have scraped the underside of the spoiler... but it most likely would not have pulled and ruined the paint.... cost me over $700 to repaint... i took the plates off the next day and tossed them into the trash. i don;t recommend them.... obviously... just thought you should know.

damn sorry to hear. you should call RPI up and get your money back

Dammmittt · 09-05-2008, 08:22 AM

Quote:

Originally Posted by AtoB

i had them... when i did scrap my fangs... these plates actually (IMO) made the situation worse.. the edge of the plate caught, and then caused the fangs to bend, and crazed the paint... if i hadn't had the RPI skid plate i know i would have scraped the underside of the spoiler... but it most likely would not have pulled and ruined the paint.... cost me over $700 to repaint... i took the plates off the next day and tossed them into the trash. i don;t recommend them.... obviously... just thought you should know.

This is exactly why I don't want the skid plates.

AtoB · 09-05-2008, 09:02 AM

Quote:

Originally Posted by MMMazing07

damn sorry to hear. you should call RPI up and get your money back

i actually did bring it up with RPI when i was ordering the scoop... i didn't want to be a jerk about it. but there was no real response to what i told them. i blame myself... i had concerns about the plates and their design, and did it anyway... but, thought it was only fair to share my experience with anyone considering them.

thekurgan · 09-05-2008, 09:24 AM

Quote:

Originally Posted by AtoB

i actually did bring it up with RPI when i was ordering the scoop... i didn't want to be a jerk about it. but there was no real response to what i told them. i blame myself... i had concerns about the plates and their design, and did it anyway... but, thought it was only fair to share my experience with anyone considering them.

Much appreciated the share of information, I was going to order, but now that I see the up close picture, I would rather have those nuts/bolts flush as I can see those getting caught as well.

mishaalt · 09-05-2008, 04:29 PM

thanks for the update, i dont want to risk that happening. BMW PGA championship in town this weekend, cant wait to see the parking lot. BMW owners get to park upfront.

Black///Mamba · 09-11-2008, 09:58 AM

i dunno. i have them and dont' c a problem in the design..

AtoB · 09-11-2008, 10:47 AM

Quote:

Originally Posted by Black///M

i dunno. i have them and dont' c a problem in the design..

i have no reason to lie.

thekurgan · 09-22-2008, 09:34 AM

I ordered a set of these yesterday but plan to use a flat bolt, or possibly a recessed bolt so to lessen the likelihood of having the bolt snagged. If it works out, I'll shoot some pics up.

06-17-2008, 05:43 PM	#1
mishaalt New Member 3 Rep 14 Posts Drives: Z4 M Roadster 2007 Join Date: Jun 2008 Location: Saint Louis, MO iTrader: (0)	Z4 M Skid Plates I have called RPI and talked to them regarding the skid plates, they told me that they were machined for the Z4 M Coupe. Will they fit on a 2007 Z4 M Roadster, I have called BMW parts and they have been unable to tell me if the coupe and Roadster use the same front bumpers. Thanks in advance for any responses. MT
	Appreciate 0 Tweet Quote

06-17-2008, 05:52 PM	#2
wrh3 Car Guy 31 Rep 796 Posts Drives: 2005 MCS, 2013 Corvette 427 Join Date: Aug 2007 Location: ATL, GA iTrader: (10)	I always thought the bumper on the M coupe and roadster were the same? I think they should work, you can go to http://www.realoem.com/bmw/select.do and verify that the part numbers are the same. __________________ Bill- 2005 Mini Cooper S, 2013 Corvette 427 www.billswebspace.com/bmwindex BMW CCA Member # 389948
	Appreciate 0 Quote

06-18-2008, 09:48 AM	#4
mishaalt New Member 3 Rep 14 Posts Drives: Z4 M Roadster 2007 Join Date: Jun 2008 Location: Saint Louis, MO iTrader: (0)	Thanks for the information. OEM has them as different part numbers but are they the same bumper? I want to make sure all the bolt holes will align with the skid plated.
	Appreciate 0 Quote

06-18-2008, 09:55 AM	#5
wrh3 Car Guy 31 Rep 796 Posts Drives: 2005 MCS, 2013 Corvette 427 Join Date: Aug 2007 Location: ATL, GA iTrader: (10)	Take a look at these pics from my M Coupe and see what you think, do you have two screws in the same place for mounting the skid plate: __________________ Bill- 2005 Mini Cooper S, 2013 Corvette 427 www.billswebspace.com/bmwindex BMW CCA Member # 389948
	Appreciate 0 Quote

06-18-2008, 10:17 AM	#6
Black///Mamba Lieutenant 53 Rep 598 Posts Drives: a beast Join Date: Jan 2008 Location: NJ iTrader: (0)	i have a Roadster and ordered the plates and they just arrived. I will install them today after work and let you know if it works or not. I have already slightly scuffed up the fangs (DOH!) anything i can do to repair the damage? I hate having nice things sometimes, makes it so sad when you mess them up.
	Appreciate 0 Quote

06-19-2008, 04:13 PM	#9
mishaalt New Member 3 Rep 14 Posts Drives: Z4 M Roadster 2007 Join Date: Jun 2008 Location: Saint Louis, MO iTrader: (0)	wrh3- thanks for the pics, I will check and see if the bolt holes look similar. Black///M- Did they fit on your roadster? Depending on the damage the fangs can be repaired. My body shop is able to lightly sand down the area and paint before I put on the skid plates.
	Appreciate 0 Quote

06-25-2008, 08:49 PM	#10
chris719 Major General 7334 Rep 7,295 Posts Drives: '08 M Roadster Join Date: Oct 2007 Location: NJ iTrader: (0)	Also interested if they fit the roadster...
	Appreciate 0 Quote

06-26-2008, 07:57 AM	#11
Black///Mamba Lieutenant 53 Rep 598 Posts Drives: a beast Join Date: Jan 2008 Location: NJ iTrader: (0)	sorry guys, i have been super busy as of late. work has been hectic since its the quarter end. i will try and do this today after work and let you all know.
	Appreciate 0 Quote

07-09-2008, 01:00 PM	#12
mishaalt New Member 3 Rep 14 Posts Drives: Z4 M Roadster 2007 Join Date: Jun 2008 Location: Saint Louis, MO iTrader: (0)	Black///M any luck getting them on? Thanks, MT
	Appreciate 0 Quote

09-04-2008, 07:27 PM	#13
Black///Mamba Lieutenant 53 Rep 598 Posts Drives: a beast Join Date: Jan 2008 Location: NJ iTrader: (0)	oh btw, forgot to respond. the plates fit fine. __________________
	Appreciate 0 Quote

09-05-2008, 04:29 PM	#19
mishaalt New Member 3 Rep 14 Posts Drives: Z4 M Roadster 2007 Join Date: Jun 2008 Location: Saint Louis, MO iTrader: (0)	thanks for the update, i dont want to risk that happening. BMW PGA championship in town this weekend, cant wait to see the parking lot. BMW owners get to park upfront.
	Appreciate 0 Quote

09-11-2008, 09:58 AM	#20
Black///Mamba Lieutenant 53 Rep 598 Posts Drives: a beast Join Date: Jan 2008 Location: NJ iTrader: (0)	i dunno. i have them and dont' c a problem in the design.. __________________
	Appreciate 0 Quote

09-22-2008, 09:34 AM	#22
thekurgan Bad Lieutenant 232 Rep 3,517 Posts Drives: E90M3 Join Date: Aug 2007 Location: Sacramento iTrader: (0) Garage List 2008 BMW M3 [0.00]	I ordered a set of these yesterday but plan to use a flat bolt, or possibly a recessed bolt so to lessen the likelihood of having the bolt snagged. If it works out, I'll shoot some pics up.
	Appreciate 0 Quote