F1 2023: Australian GP - Melbourne (Apr 02)

[NYG]

F1 2023: Australian GP - Melbourne (Apr 02)

Melbourne

When was the track built?

The deal to host Formula 1 in Melbourne was done in 1993, with the decision taken to create a circuit using a mixture of the existing roads around the city’s Albert Park – mainly Aughtie Drive and Lakeside Drive if you fancy driving it yourself – with a little detour through the Lakeside Stadium’s car park.

When was its first Grand Prix?

Just four months after Adelaide held its last Australian Grand Prix at the end of 1995, the Formula 1 teams were back in Australia for Melbourne's first Grand Prix at the start of 1996. That race is most often remembered for Martin Brundle’s infamous Jordan crash at Turn 3 after he launched himself off the back of Johnny Herbert’s Sauber.

What’s the circuit like?

As a temporary facility, Albert Park can be quite bumpy - though resurfacing for 2022 will no doubt improve matters - while the circuit at the start of the weekend is often slippery, rubbering in as the sessions progress. It’s also a circuit that requires a well-sorted chassis, with several spots on the track where the drivers require a reactive front end to allow them to chuck it into a corner. Melbourne is also one of the faster tracks on the calendar, with Lewis Hamilton’s 2019 pole lap set at an average of over 235km/h.

Why go?

Often found on lists of the world’s best cities, Melbourne is a blast all year round – and it only gets better when Formula 1 rolls into town. There are bars and restaurants aplenty, you’re right by the beach, while the race’s appearance at the start of Australia’s autumn means the temperatures should be peachy.

Where is the best place to watch?

If you want to get in a grandstand, opt for either the Waite stand overlooking Turn 10, or the Brabham Grandstand on the outside of Turn 2 to watch cars jostling for position through the first chicane. Alternatively, there are some nice general admission spots on the far side of the lake – go for either between Turns 8-9 or 9-10 if you fancy some F1 picnic feels.

https://www.formula1.com/en/racing/2...a/Circuit.html

2022 race highlights:

2022 thread:
https://f87.bimmerpost.com/forums/sh....php?t=1910270

[NYG]

One of my favorite circuits. AM is the truth!!

I'm going:

VER
PER
ALO
LEC
STR

[///M Power-Belgium]

Originally Posted by NYG

Attachment 3135787



https://www.formula1.com/en/racing/2...a/Circuit.html

Thanks for posting my friend !

[NYG]

Originally Posted by ///M Power-Belgium

Thanks for posting my friend !

[///M Power-Belgium]

Originally Posted by NYG

I read that Checo got also strange noises and vibrations at high speed , just like MAX .

I think something is going on with the RB19's driveshaft .As Max said.
Hope the Red Bull team can fix it for the Australian GP ...

[M5Rick]

Originally Posted by ///M Power-Belgium

I read that Checo got also strange noises and vibrations at high speed , just like MAX .

I think something is going on with the RB19's driveshaft .As Max said.
Hope the Red Bull team can fix it for the Australian GP ...

Not sure but could the d/shafts be lightened a little too much...

[lens]

Originally Posted by ///M Power-Belgium

I read that Checo got also strange noises and vibrations at high speed , just like MAX .

I think something is going on with the RB19's driveshaft .As Max said.
Hope the Red Bull team can fix it for the Australian GP ...

They got 2 weeks to figure it out.

I'm sure the guys at the factory are making new driveshafts at the moment and testing them

Good news is that stuff isn't restricted so we'll see beefed up ones for Australia.

[///M Power-Belgium]

Originally Posted by M5Rick

Not sure but could the d/shafts be lightened a little too much...

Sure . As we know the RB19 is lighter than the 2022 RB18-B.
Extremely lightweight can compromise reliability and durability.
Won't be easy for Red Bull to fix that .

[M5Rick]

Originally Posted by ///M Power-Belgium

Sure . As we know the RB19 is lighter than the 2022 RB18-B.
Extremely lightweight can compromise reliability and durability.
Won't be easy for Red Bull to fix that .

As said there is no restriction on these so a few extra grams of strengthening won't make much difference seing the 19's already big advantage they got through hard work and late nights

[///M Power-Belgium]

Originally Posted by lens

They got 2 weeks to figure it out.

I'm sure the guys at the factory are making new driveshafts at the moment and testing them

Good news is that stuff isn't restricted so we'll see beefed up ones for Australia.

Actually already 4 weeks , because at Bahrain they thought it was MAX's gearbox , that's why his gearbox was replaced at Jeddah.
MAX's downshifts really s@cked in Bahrain. (lag and vibrations)

I think , it won't be easy to engineer a stronger driveshaft .
The driveshaft and U-joints provide a means of transferring engine torque to the drive axles.
The issue is ,the F1 driveshaft is made from CF (lightweight carbon fibre)

[Jackie Chiles]

PER
ALO
HAM
LEC
RUS

Max breaks again. Karma is a bitch. But if he doesn't break he will probably win.

[M5Rick]

Going with what is presently
Max
Checo
Fernie
Lance (with stronger wrists)
Charlie
Carlito
Russel
LEW (driving to survive)

[Killed by Death]

My prediction for Ferrari = PAIN

[M5Rick]

Originally Posted by Killed by Death

My prediction for Ferrari = PAIN

You need a pain killer my friend

[M5Rick]

Axe being swung at Woking also with Key out and ex-Ferrari Sanchez in with shake up and restructure at McLarens.
https://racingnews365.com/key-out-sa...Tec-2023-03-23

[Killed by Death]

Originally Posted by M5Rick

You need a pain killer my friend
https://www.youtube.com/watch?v=kO_EdmtR5Ck

Rather have a squeeze box my friend

https://youtu.be/4n02PD18cFs

[M5Rick]

Originally Posted by Killed by Death

Rather have a squeeze box my friend

https://youtu.be/4n02PD18cFs

Vid unavail' but I have an idea

[NYG]

Originally Posted by ///M Power-Belgium

I read that Checo got also strange noises and vibrations at high speed , just like MAX .

I think something is going on with the RB19's driveshaft .As Max said.
Hope the Red Bull team can fix it for the Australian GP ...

Yeah I'm hoping after Max's broken one in quali and the race, they've got their eyes on it.

[M5Rick]

Originally Posted by ///M Power-Belgium

Actually already 4 weeks , because at Bahrain they thought it was MAX's gearbox , that's why his gearbox was replaced at Jeddah.
MAX's downshifts really s@cked in Bahrain. (lag and vibrations)

I think , it won't be easy to engineer a stronger driveshaft .
The driveshaft and U-joints provide a means of transferring engine torque to the drive axles.
The issue is ,the F1 driveshaft is made from CF (lightweight carbon fibre)

May have to use last seasons ones if the problem continues.

[///M Power-Belgium]

Melbourne

[///M Power-Belgium]

[NYG]

New Jersey has just approved ~3B development near Atlantic City for a Formula 1 race track.