Cars wanted for professional photoshoot - Print ads in Roundel, GRM, Bimmer...

[Eddy@ApexWheels]

We are looking for local volunteers with cars that want to be featured in our full page magazine advertising. A professional automotive photographer has been hired for this shoot. These ads will be listed in a growing number of magazines, and each month will have a different featured car.

We are looking for a wide range of cars already running the ARC-8 wheels, or magazine/show worthy cars that we can put ARC-8 wheels on for the photoshoot if a customer does not volunteer with that model. Individual photos will be taken, in addition to a group shot. Cars must be clean and damage free with tasteful mods. We'll provide copies of the professionally edited photos after the shoot is complete.

Photos would be taken on either the weekend of March 24th-25th, or March 31-April 1st.

Ideally volunteers will already have ARC-8 wheels.

If you would like to volunteer please let us know. If possible, please post a photo of your car in this thread.

We are looking for the following:

Z4 M coupe: Must have lowered suspension and camber plates. BBK preferred. Would already have or could fit 18x8.5"/18x10.5" setup or 18x9.5"/18x10.5" setup

Z3 M coupe: Must have lowered suspension and camber plates. BBK preferred. Would already have or could fit 18x8.5"/18x10.5" setup or 18x9.5"/18x10.5" setup

E90 or E92 M3: Must be lowered suspension and have a BBK. If the car already has ARC-8 wheels, then any combination of 9.5/10/10.5" wheels is OK.

E46 M3: Must be on lowered suspension with camber plates. Ideally would already have 18x9.5" ET35 ARC-8 wheels running 265/35/18's on 18x9.5" wheels properly. BBK preferred

E46 non-m: Must be on lowered suspension with camber plates. Ideally would already have 18x9" square setup with 255/35's or 245/35's. BBK preferred.

E36 M3: lowered suspension and camber plates a must. Looking for 17x9" ARC-8's with 245/40/17 or 255/40/17 ARC-8 wheels. BBK preferred

135i: Must have camber plates and lowered suspension. Running ARC-8 wheels in 18x8.5" front and 18x9.5" rear. Tires must be 245/35 or 255/35 front and rear can be 265 or 275 rear.

1M: ideally on a lowered suspension. If the car already has ARC-8 wheels, then any combination of 9.5/10/10.5" wheels is OK.

[MRZ07]

Too bad ///M Roadsters are not included on the list. That would have been nice

[Eddy@ApexWheels]

Originally Posted by MRZ07

Too bad ///M Roadsters are not included on the list. That would have been nice

Roadsters could work as well. Do you already have ARC-8 wheels and suspension modifications?

[MRZ07]

Originally Posted by paintpro21

Roadsters could work as well. Do you already have ARC-8 wheels and suspension modifications?

I have suspension mods however I have forgestar wheels

[jdl1pt]

Hmmmm, I'd love to do this if we could get the timing down, though you might have better options out there. I have coilovers I've been wanting to install now for quite some time and this would be a great reason to do so. I could probably get them on next weekend if you were going to do a shoot the weekend after. I've also just finished a remarkable detail, so my car is in great condition.

I DON'T have Apex or a BBK, but will be installing camber plates.

If you are interested, drop me a PM and I'll get to work on the instal soon.

Here is a pic: (and btw, my license plate was photoshopped in this pic)