|
|
SUPPORT ZPOST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
Post Reply |
|
Thread Tools | Search this Thread |
04-17-2008, 07:30 PM | #1 |
Brigadier General
2070
Rep 4,365
Posts
Drives: '07 Z4 Coupe, '21 X3, '16 GMC
Join Date: Aug 2007
Location: Iowa
|
Clutch stop length
Mainly for dekaliber. I took a hack saw and shortened mine since I had a few problems starting it sometimes. It could be about 1 mm longer and be fin... I just couldn't cut that small of a piece off with the saw I was using.
First pic shows the thread tip (showing it is longer than 1 1/4 inches) Second pic shows true length (including platform but not the pad 1 3/8") Third pic shows where the base was aligned (yes I know I am janky) The pad I am using is about 3/16 inches thick (but I have been using it so this is the compressed size)
__________________
2007 Z4 3.0si Coupe • 6 MT • Black Saphire Metallic • PP • SP
2016 GMC Sierra SLT Z71 Premium Plus 4x4 2017 Harley StreetGlide • Denim Black • V&H Tune 2021 BMW x30i • Phytonic Blue Metallic • Fully loaded |
Post Reply |
Bookmarks |
|
|