|
|
SUPPORT ZPOST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
Post Reply |
|
Thread Tools | Search this Thread |
07-14-2021, 02:41 PM | #1 |
///Multiple
2992
Rep 4,243
Posts
Drives: M4 Coupe | M3 | Z4M Roadster
Join Date: Jan 2011
Location: San Diego, CA
iTrader: (1)
Garage List 2006 BMW Z4 M Roadster [8.81]
2016 BMW M4 Coupe ( ... [10.00] 2018 BMW M3 (Euro D ... [0.00] 2011 BMW 335is Coup ... [10.00] |
Correct rotor hold-down bolt part number(s) for M Roadster?
For anyone that has replaced the rotors on a Z4 M Roadster, what is/are the correct part number(s) for the rotor hold-down bolts?
On realoem.com, they are called "inner hex bolts" and they show p/n 34111123072 for the front rotors and p/n 34211161806 for the rear rotors. However, when I tried ordering the -072 bolt I got a warning that "this part does not fit your Z4 M Roadster". realoem.com also shows a total of four bolts for the front and four for the rear, which I assume is two for each rotor. Is this correct? Seems like other BMWs have only one hold-down bolt, but I've never replaced rotors on a BMW before.
__________________
The Coupe: 2016 M4 | Sakhir Orange | Black Full Merino Leather | CF Trim | M-DCT | More | ED 5/13/16
The Sedan: 2018 M3 | San Marino Blue | Black Full Merino Leather | CF Trim | M-DCT | ZCP | ED 7/18/18 The Roadster: 2006 Z4 | Interlagos Blue | Black Extended Nappa Leather | Carbon Leather Trim | Purchased 7/19/12 |
07-16-2021, 09:29 PM | #2 |
First Lieutenant
126
Rep 355
Posts |
they new ones I ordered from ecs were different from my original ones, the heads were slightly different. they worked fine though. I assume the original ones were superseded ....
__________________
Ken B.(BMWCCA/PCA/ZSCCA/SCCA)
|
Appreciate
1
SD ///M42992.00 |
07-16-2021, 10:00 PM | #3 |
///Multiple
2992
Rep 4,243
Posts
Drives: M4 Coupe | M3 | Z4M Roadster
Join Date: Jan 2011
Location: San Diego, CA
iTrader: (1)
Garage List 2006 BMW Z4 M Roadster [8.81]
2016 BMW M4 Coupe ( ... [10.00] 2018 BMW M3 (Euro D ... [0.00] 2011 BMW 335is Coup ... [10.00] |
What part numbers did they send you, if you still have that info?
__________________
The Coupe: 2016 M4 | Sakhir Orange | Black Full Merino Leather | CF Trim | M-DCT | More | ED 5/13/16
The Sedan: 2018 M3 | San Marino Blue | Black Full Merino Leather | CF Trim | M-DCT | ZCP | ED 7/18/18 The Roadster: 2006 Z4 | Interlagos Blue | Black Extended Nappa Leather | Carbon Leather Trim | Purchased 7/19/12 |
Appreciate
0
|
07-20-2021, 06:34 PM | #5 |
Captain
114
Rep 779
Posts |
That looks right.. fcp shows it for 06 M
https://www.fcpeuro.com/products/bmw...123072#fitment
__________________
-Roranji
|
Appreciate
0
|
07-26-2021, 12:26 PM | #6 |
///Multiple
2992
Rep 4,243
Posts
Drives: M4 Coupe | M3 | Z4M Roadster
Join Date: Jan 2011
Location: San Diego, CA
iTrader: (1)
Garage List 2006 BMW Z4 M Roadster [8.81]
2016 BMW M4 Coupe ( ... [10.00] 2018 BMW M3 (Euro D ... [0.00] 2011 BMW 335is Coup ... [10.00] |
Ok, realoem.com was right. All of the online retailers are wrong when they say that BMW p/n 34111123072 does not fit a Z4 M Roadster, and here's the proof.
p/n 34111123072 is the hold-down bolt for the front rotors and p/n 34211161806 is the hold-down bolt for the rear rotors. Both are M8x12 but they are distinctly different. The front rotor bolt is smaller in size and requires a 5mm Allen socket while the rear rotor hold-down bolt is larger and requires a 6mm Allen socket. In addition, the rear hold-down bolt will not fit inside the hole seat in the front rotor and does not fit flush with the surface of the rotor due to the additional "shoulder" on the bolt and the larger face. Fortunately, all of the hold-down bolts came off easily with an impact driver after an application of Liquid Wrench. The front hold-down bolts were in pretty good shape, cleaned up pretty well, and can be re-used, while the rear hold-down bolts were quite rusted. And yes, there are two hold-down bolts in each rotor.
__________________
The Coupe: 2016 M4 | Sakhir Orange | Black Full Merino Leather | CF Trim | M-DCT | More | ED 5/13/16
The Sedan: 2018 M3 | San Marino Blue | Black Full Merino Leather | CF Trim | M-DCT | ZCP | ED 7/18/18 The Roadster: 2006 Z4 | Interlagos Blue | Black Extended Nappa Leather | Carbon Leather Trim | Purchased 7/19/12 |
Post Reply |
Bookmarks |
|
|