Modification Journal / 2006 M Coupe / Interlagos Blue / #207 of 1815

[crfine88]

Originally Posted by Roffle Waffle

Could you post the weights of the nav system components? I think you did before but I'm not sure... Its a big thread! I think you said its 60lbs total..

You gave me the idea of an LTW system, but mine's gonna be permanent

by the way, does the car feel like it picked up more torque in the low-end and mid-range since you dropped all that weight>?

The car was down for too long during the process for me to give a real solid review, but between the stereo and seats she feels much lighter in the low end

[crfine88]

Originally Posted by davesz4mc

He can make a stereo box that sits in the rear cadge area with quick connects for track days. Headunit and speakers in it quick connect for power and front speakers...

Or just an amp and speakers then you can play your ipod straight into the amp. Smaller package super easy setup.

This is the plan, but it's top secret

Originally Posted by nmulax

This is along the lines of what he has in mind.

[ZStig]

yeah I'm keeping my LTW sound a secret for now too. Its a LOT of research....

for example, most aftermarket amps weigh on average of 16lbs... There are motorcycle amps that are light as fuck, but they're too weak for most solutions. Gotta have something in between ;P

[crfine88]

Originally Posted by Roffle Waffle

yeah I'm keeping my LTW sound a secret for now too. Its a LOT of research....

for example, most aftermarket amps weigh on average of 16lbs... There are motorcycle amps that are light as fuck, but they're too weak for most solutions. Gotta have something in between ;P

Cool, I look forward to seeing what you come up with. It is going to be a process for sure.

[davesz4mc]

Did you replace the dash top where the nav came out? If you would or not ask them to fab a replica or second cadge how much would it be for me to buy it from you =-). Also, does that weight include them trip peices, rear panel and seat belts? Someone that does not have nav "I already have it" may want to pick that up =-) at least you get to see your board computer and have more trip calculation stuff.

[davesz4mc]

maybe start a group buy for some lightweight replacement glass for the hatch etc. Someone out there should make us some if they get enough orders.

[Brain]

Originally Posted by davesz4mc

maybe start a group buy for some lightweight replacement glass for the hatch etc. Someone out there should make us some if they get enough orders.

TC Kline already has the tooling/R&D done for a CF hatch, which would accomplish much of the same thing, even more so if you got the glass replaced with lexan. If you're serious this would probably be the more effective and route of least resistance regarding weight savings on the hatch.

[crfine88]

Originally Posted by davesz4mc

Did you replace the dash top where the nav came out? If you would or not ask them to fab a replica or second cadge how much would it be for me to buy it from you =-). Also, does that weight include them trip peices, rear panel and seat belts? Someone that does not have nav "I already have it" may want to pick that up =-) at least you get to see your board computer and have more trip calculation stuff.

I replaced the whole dash with a non-nav dash.

My cage was built into the car, but I can ask if they would be able to replicate it as a bolt in and find out a price for you if you would like

The weight only includes the stero/nav parts listed. There is much more weight savings from the other parts you listed and I will do a complete comparrison once the project is done

[crfine88]

Originally Posted by davesz4mc

maybe start a group buy for some lightweight replacement glass for the hatch etc. Someone out there should make us some if they get enough orders.

That would be cool, One of our members here is already working on many ideas. He is a composites guy with a wealth of knowledge and experience

[crfine88]

Originally Posted by marketing

TC Kline already has the tooling/R&D done for a CF hatch, which would accomplish much of the same thing, even more so if you got the glass replaced with lexan. If you're serious this would probably be the more effective and route of least resistance regarding weight savings on the hatch.

Yep, another great resource

[ZStig]

you DID scrape off that extra foam behind the dash right? hahahahahha

Unfortunately, as I'm putting together a parts list, my sound system would weigh ~24lbs BUT cost a bit under a grand. A bit expensive, so definitely not a priority right now

[crfine88]

Originally Posted by Roffle Waffle

you DID scrape off that extra foam behind the dash right? hahahahahha

Unfortunately, as I'm putting together a parts list, my sound system would weigh ~24lbs BUT cost a bit under a grand. A bit expensive, so definitely not a priority right now

Damn you! now that you have mentioned this, I am going to have to pull it all out againg and remove that foam. arghhhhhhhhhhhhhhhhhhhh!


I am with you on the the sound system. It will be very cool, but it is expensive and at the bottom of my priority list.

[ZStig]

Originally Posted by crfine88

Damn you! now that you have mentioned this, I am going to have to pull it all out againg and remove that foam. arghhhhhhhhhhhhhhhhhhhh!


I am with you on the the sound system. It will be very cool, but it is expensive and at the bottom of my priority list.

make sure to load up on beer

[crfine88]

Originally Posted by Roffle Waffle

make sure to load up on beer

Good call,

[davesz4mc]

What is the view out the back of the car with that wing on it? Can we take a pic maybe?

I would love a price on the cadge if you don't mind, not in a hurry for it so when you get a chance. I would weld it into my car as long as it was pre-welded up...

[crfine88]

Originally Posted by davesz4mc

What is the view out the back of the car with that wing on it? Can we take a pic maybe?

I would love a price on the cadge if you don't mind, not in a hurry for it so when you get a chance. I would weld it into my car as long as it was pre-welded up...

I will post a pic up toninght. The wing itself is not visible, only the brackets themselves. It atually works out really well.

I will find out for you on the cage with-in the next week or so.

[nekky]

Every time I see this stupid post at the top of the "new posts" list I click on it hoping that crfine88 has dumped some more badass parts onto his car...

Are you looking to adopt a son?

[crfine88]

Originally Posted by crfine88

...Parts installed, tested, or in progress. Write-ups pending:

32. APR GTC 200 Wing
33. Macht Schnell Spacers project 3mm,5mm,10mm & 18mm
34. Zpost/APR CF V2 front Splitter
35. Volk TE37 SL's pressed graphite
35. Nav/stereo system delete
36. Bulkhead delete
37. Macht Schnell light weight battery tray and Brallie battery
38. ADVAN RZ-DF w/ ADO8's
39. Status ring GT's / Status 4-point harnesses / Macht Schnell mounting hardware
40. APEX ARC-8's with Hankook RS-3's
41. 4-point cage design & fabrication
42. 4-point cage painted IB
43. Gauge pod design and fabrication
44. Stack 3500 series boost, h20, oil ppsi, & egt / 3100 series AFR gauge
45. Windshield washer system delete
46. Jet Hot header coating
47. DKF exhaust system prototype testing
48. Air-bag system delete
49. Sparco DTM seats / Status 6-point FIA harnesses / Macht Schnell mounting hardware
50. Sparco Ring steeringwheel (Merry Christmas from the wife )
51. NRG short hub and 2.5 quick release
52. Lamin-X headlight and bumper protection
53. Upgraded ESS BPV

.

Originally Posted by nekky

Every time I see this stupid post at the top of the "new posts" list I click on it hoping that crfine88 has dumped some more badass parts onto his car...

Are you looking to adopt a son?

Here you go, I updated a list of write-ups/photos to come.
Thanks for the support.
We are having our first child in March and I am freaking out, so not in any position to adopt

[davesz4mc]

How about a live in sitter that works for car mods =-)

j/k you will love the child and wonder where all your spare money went...

[crfine88]

Originally Posted by davesz4mc

How about a live in sitter that works for car mods =-)

j/k you will love the child and wonder where all your spare money went...

HIRED!!!

[esqu1re]

Just saw your pic of the stereo components. I didn't know our subs were that small. Sad.

[crfine88]

Originally Posted by esqu1re

Just saw your pic of the stereo components. I didn't know our subs were that small. Sad.

Yeah, I was surprised when I removed them. The whole system seems a little sheepish when out in the open. I know our cars are all about the drive and not the stereo system, but still