WTB: 2007 Z4M Driver's Side Seat Belt Guide

[pyshin]

Problem solved thanks to VindieselJetta.

[VindieselJetta]

These are still available from BMW FYI.

[pyshin]

Originally Posted by VindieselJetta

These are still available from BMW FYI.

Did you inquire at your local dealership? I've searched everywhere online and even asked ECS Tuning that confirmed they were discontinued.

[VindieselJetta]

Is this not it?
https://www.ecstuning.com/b-genuine-...r/52107898477/

[pyshin]

Originally Posted by VindieselJetta

Is this not it?
https://www.ecstuning.com/b-genuine-...r/52107898477/

Unfortunately it is not.

[VindieselJetta]

Originally Posted by pyshin

Unfortunately it is not.

I Bought this same item # from Ecs for my drivers seat belt guide, so maybe we arent talking about the same part? What is the part # for the guide you are trying to obtain?

[VindieselJetta]

The picture you provided is of this exact same part I linked :scratches head: I think you may be confused on what you think this part looks like.

[pyshin]

Originally Posted by VindieselJetta

The picture you provided is of this exact same part I linked :scratches head: I think you may be confused on what you think this part looks like.

I've circled the exact part I'm looking for in the picture:


It is the thin top half of the seat belt guide that snaps in place on a post-facelift 2007 Z4M

I thought I had the part no. correct but I sent that same picture to ECS and they verified that the part is discontinued.

[VindieselJetta]

That thin part is attached to the plate that bolts to the seat, as seen in the ECS photo. It is not a separate piece. I have replaced that part myself, so I am very familiar. To be clear - are you saying the linked part I sent you is unavailable? Bc that IS the correct part.

[VindieselJetta]

The part I linked has a disposable piece of plastic that keeps the clip open until you clip it around your seatbelt, which is why it looks strange.

[VindieselJetta]

The light silver part in the ECS pic is the disposable clip separator. It is not part of the part

[pyshin]

Originally Posted by VindieselJetta

The light silver part in the ECS pic is the disposable clip separator. It is not part of the part

Originally Posted by VindieselJetta

That thin part is attached to the plate that bolts to the seat, as seen in the ECS photo. It is not a separate piece. I have replaced that part myself, so I am very familiar. To be clear - are you saying the linked part I sent you is unavailable? Bc that IS the correct part.

Originally Posted by VindieselJetta

The part I linked has a disposable piece of plastic that keeps the clip open until you clip it around your seatbelt, which is why it looks strange.

Originally Posted by VindieselJetta

The light silver part in the ECS pic is the disposable clip separator. It is not part of the part

Thanks for the clarification on why the provided photos on the site look so strange. ECS must have been mistaken when they told me it was discontinued. I will add it on to an order I have pending with them. Thanks again for the help I honestly thought I would have to ask a good friend to 3D model and print one for me lmao