|
|
SUPPORT ZPOST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
Post Reply |
|
Thread Tools | Search this Thread |
01-06-2024, 03:34 PM | #1 |
Enlisted Member
6
Rep 35
Posts |
Passenger side engine mount removal
I知 replacing my head gasket, from what I致e read I need to take off the exhaust manifold to do so, and my repair manual says I need to take off this engine mount to get to it, but I知 not sure how to get it out. Is there something I知 missing, or do I need to take off part of the suspension(?) system to make enough clearance for it? I was able to get off the 4 bolts connecting it to the engine, and the nut on the bottom but not the one on top, right now I知 trying to figure out if I can get that off to see if that helps. This is the first real job I知 doing on this car(or any car for that matter) aside from changing fluids and the valve cover gasket, so I知 not super familiar with how it all connects together
|
01-06-2024, 03:51 PM | #2 |
Enlisted Member
6
Rep 35
Posts |
Update: I got it out! When I got that top nut off I was able to pull the two parts out separately, the mount and then the piece it attaches to
|
Appreciate
2
grannyknot1008.50 Z4Kevo89.00 |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|