|
|
SUPPORT ZPOST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
Post Reply |
|
Thread Tools | Search this Thread |
04-20-2024, 02:18 PM | #1 |
Enlisted Member
8
Rep 42
Posts |
Sonar Lights - Wiring the relay help
Racking my brains trying to find an answer here. PO installed Sonar angel eye lights. Really shitty job but unfortunately I made it worse. I thought I didn't need the relay so I cut it out and put the wiring back to factory (at least I think I did) but now I have a lamp indicator and the lights are always on. I found this link https://www.zpost.com/forums/showthread.php?t=1619167
but the wire coloring doesn't match up with my harness. I'm a complete idiot when it comes to wiring, but I think there is not much here - I just need to figure out how to splice in the relay and know if it goes on the harness side or the headlight side. Any guidance would be greatly appreciated. |
05-29-2024, 07:55 PM | #2 |
Enlisted Member
8
Rep 42
Posts |
Solved
With the help of ChatGPT, I finally got this solved. Here is what I did. I also had to add a 2nd signal wire to pin 86 as there are two signals for hi beams - not one.
Hope this helps someone! |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|