Brembo 6 Piston BBK E46 M3 and Z4M

[OG_M3]

BIMMERPOST / Classifieds

Asking Price:

Sold

Item Interest

Hi All,

I have a Brembo GT 6 Piston BBK for E46 M3 or Z4M. Comes with:
-2 6 Piston Brembo Calipers
-2 Rotor Hats
-2 SS lines
-2 Mounting Brackets

All you need to add are the rotor rings of your choice (slotted or drilled) and you have a nice front BBK for your car.

Brembo Part# 1M2.8008A1
This was originally the 355x32 Kit

Calipers are in good condition as with the rotor hats.

Willing to ship as these are packaged and ready to go.

[dre99gsx]

What are the piston sizes? And this seems to be the 355x32 kit (didn't see that specified).

[solo the lad]

would these fit a standard z4 (N52) ?

[OG_M3]

Originally Posted by dre99gsx

What are the piston sizes? And this seems to be the 355x32 kit (didn't see that specified).

Sorry about that, yes you are correct. This is the 355x32 kit. As far as piston sizes, I do not know as I dont believe Brembo publishes them

Originally Posted by solo the lad

would these fit a standard z4 (N52) ?

I am not 100% sure the front spindles may be different. Maybe someone on here has an idea?

[dre99gsx]

You can measure the pistons with a caliper or look at the dust shields, they may say the diameter (32, 34, etc. etc...)

The rotor will fit a Z4 3.0si since I run a Z4M Stoptech kit on my 3.0si, but, you'll need to customize the caliper bracket. I designed my own to move the caliper to the correct orientation.

You may be able to source a non-M caliper bracket somewhere, not sure...

[Blakkflame]

If you split the set, interested in your hats !

[DoubleAces]

Did I miss the price somewhere?

[CJW2OO4]

I believe these were sold