Coilovers and camber questions

ZeroSwayzak · 10-22-2017, 05:13 AM

hi there, I have an e85 3000i euro spec. I am about to replace the shocks for some coilovers, mine are done and want something sportier. At the same time i'd like to gain some more negative camber in the front. Few questions for you guys

-i dont want to install camber plates, for the squiky noise mainly. Are there any camber bolts kit/upper rubber strut kit?
-for the coilovers I am on a butdget so i am considering vogtland and ap, do you guys know which have the less harsh ride?

The HACK · 10-25-2017, 09:36 AM

Quote:

Originally Posted by ZeroSwayzak

-i dont want to install camber plates, for the squiky noise mainly. Are there any camber bolts kit/upper rubber strut kit?

Not on the none-M.

dc_wright · 10-25-2017, 12:22 PM

Quote:

Originally Posted by The HACK

Not on the none-M.

^This^

All you can do on a non-M is remove the factory alignment pins from the strut cap and then use the max movement you can get from the slotted strut mount holes. You can expect roughly 0.8 to 1.0 degrees of added neg camber from doing this.

3002 tii · 11-19-2017, 12:41 PM

Rogue used to make fixed camber plates. Alternatively you can look into the Ground Control street kit which doesn't make any noise.

10-22-2017, 05:13 AM	#1
ZeroSwayzak New Member 1 Rep 9 Posts Drives: E85 Zed 3000i manual eurospec Join Date: Mar 2012 Location: Rome, Italy iTrader: (0)	Coilovers and camber questions hi there, I have an e85 3000i euro spec. I am about to replace the shocks for some coilovers, mine are done and want something sportier. At the same time i'd like to gain some more negative camber in the front. Few questions for you guys -i dont want to install camber plates, for the squiky noise mainly. Are there any camber bolts kit/upper rubber strut kit? -for the coilovers I am on a butdget so i am considering vogtland and ap, do you guys know which have the less harsh ride?
	Appreciate 0 Tweet Quote

11-19-2017, 12:41 PM	#4
3002 tii Lieutenant General 2280 Rep 12,565 Posts Drives: Z4 M, X5, GX460 Join Date: Apr 2008 Location: CT iTrader: (99) Garage List F15 X5 xDrive35i [8.75] E86 Z4 M [10.00] F10 550i (Retired) [9.17] F25 X3 xDrive35i (R ... [9.43] E82 135is (Retired) [9.50] E85 Z4 M (Retired) [9.41] E90 328i xDrive (Re ... [9.25] E86 Z4 3.0si (Retired) [9.20]	Rogue used to make fixed camber plates. Alternatively you can look into the Ground Control street kit which doesn't make any noise. __________________ Follow for latest mods
	Appreciate 0 Quote