Need Front splitter for Z4

v8z4 · 06-21-2013, 07:23 PM

I'm looking for a splitter to put on my pre-facelift Z4 (I seem to be one of the few individuals that actually prefers the standard pre-facelift front bumper to any of the others).

I want to do something like this:

I see lots for Z4M, but nothing for Z4. I like the APR splitter but it only lists Z4Ms.

Can I use the Z4M splitter on the pre-facelift Z4?

Thanks,
Chris

speddmn · 07-12-2013, 09:45 AM

Like this?

Ebay ~$100

v8z4 · 07-12-2013, 10:25 AM

That "could" work, though its more molding than anything. I was really looking to use the actual downforce creating versions.

pyo · 07-13-2013, 12:54 AM

I was curious also and contacted APR about a splitter for the Aero Bumper. See response below. I would think it would be the same for the Stock Bumper.

Quote:

The Z4M splitter will not fit the aero bumper the same way as the bumpers
are totally different. If you are looking for a splitter on your aero bumper
we can do one to fit it that is not a problem. I will need a template of the
Bottom of the bumper Similar to what the Z4M coupe guys sent in to make the
splitter for you.

Best regards,
Tony Nguyen
TEAM APR
APR PERFORMANCE
21037 Commerce Pointe Dr.
Walnut, CA 91789, USA

v8z4 · 07-13-2013, 01:28 AM

Quote:

Originally Posted by pyo

I was curious also and contacted APR about a splitter for the Aero Bumper. See response below. I would think it would be the same for the Stock Bumper.

Did they give you an estimate on cost?

speddmn · 07-16-2013, 02:58 PM

Get out and measure the edge to edge from the back corners of the bumper (by the tires) then measure the depth you need.

Ebay is full of them in the universal race style like the M splitter.

psygnosis · 07-16-2013, 04:11 PM

Quote:

Originally Posted by v8z4

Did they give you an estimate on cost?

I would love if it was cheap enough that I wouldn't be upset if, no, when I scrape it. Something under $200ish would be nice.

pyo · 07-16-2013, 06:50 PM

Quote:

Originally Posted by v8z4

Did they give you an estimate on cost?

Never got around to sending a template so no estimate.

I figure I can just purchase a blank APR splitter and get it custom install. Altho this is not priority on my mod list.

06-21-2013, 07:23 PM	#1
v8z4 Private First Class 16 Rep 148 Posts Drives: 2003 Z4 roadster Join Date: Sep 2012 Location: Fountain Hills, AZ iTrader: (1)	Need Front splitter for Z4 - sources? I'm looking for a splitter to put on my pre-facelift Z4 (I seem to be one of the few individuals that actually prefers the standard pre-facelift front bumper to any of the others). I want to do something like this: I see lots for Z4M, but nothing for Z4. I like the APR splitter but it only lists Z4Ms. Can I use the Z4M splitter on the pre-facelift Z4? Thanks, Chris __________________ Chris
	Appreciate 0 Tweet Quote

07-12-2013, 09:45 AM	#2
speddmn Second Lieutenant 11 Rep 228 Posts Drives: 05 3.0i Join Date: Nov 2012 Location: Omaha iTrader: (0)	Like this? Ebay ~$100 Attached Images
	Appreciate 0 Quote

07-12-2013, 10:25 AM	#3
v8z4 Private First Class 16 Rep 148 Posts Drives: 2003 Z4 roadster Join Date: Sep 2012 Location: Fountain Hills, AZ iTrader: (1)	That "could" work, though its more molding than anything. I was really looking to use the actual downforce creating versions. __________________ Chris
	Appreciate 0 Quote

07-16-2013, 02:58 PM	#6
speddmn Second Lieutenant 11 Rep 228 Posts Drives: 05 3.0i Join Date: Nov 2012 Location: Omaha iTrader: (0)	Get out and measure the edge to edge from the back corners of the bumper (by the tires) then measure the depth you need. Ebay is full of them in the universal race style like the M splitter.
	Appreciate 0 Quote