|
|
SUPPORT ZPOST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
Post Reply |
|
Thread Tools | Search this Thread |
08-12-2018, 12:41 AM | #1 |
Enlisted Member
0
Rep 30
Posts |
S54 swap
Planning on an s54 swap. From an m3 because ms54. Z4m not available in my country. Its either m3 or turbo b25. Was supposed to get a z4m engine (whole front end), but and would cost much more and mss70
Got a couple questions. 1. Will the eps work with the m3 ecu? 2. Does the m3 use pwm or just on/off fuel pump? 3. Has anyone made the 420g work? Driveshaft, shifter linkage. Can get a 37bz if not. |
08-13-2018, 01:10 PM | #2 |
Private First Class
28
Rep 104
Posts |
|
08-14-2018, 12:52 PM | #3 |
Enlisted Member
0
Rep 30
Posts |
Z4 and 330ci 37bz use the same transmission carrier = m3 carrier should line up with z
37bz and 420g are both the same 25" and uses the same diff (not confirmed, just from google). Z4m and m3 use the same guibo = Stock z4m driveshaft should work Looks like the only custom piece needed will be the shifter linkage, needs to be shortened. Question is will it fit the tunnel |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|