Cup holder screws

SD ///M4 · 02-09-2016, 08:59 AM

Does anybody know the part number for the third screw that attaches the vent to the plastic post on the cup holder mechanism? Is it the same as the two screws that hold the vent to the dash?

My cup holder is broken and when I took it out I noticed that the plastic post was broken and the screw is gone.

While I'm at it, does anyone know the part number for the little plastic cap that fits over the top screw by the vent?

Thanks!

P.S. I tried searching...

P.P.S. I have the Ultimate Cup Holder, I just want to fix the stock one.

SD ///M4 · 02-09-2016, 09:22 AM

Ok, after a little more searching it appears that the part number for the screw might be 65758235255 and the description is "Torx screw for plastic material". This is from realoem.com.

In searching for this part number on this forum I saw references to removing two Torx screws to remove the cupholder, but my screws are black Phillips head screws.

Clearancediver · 02-09-2016, 03:00 PM

Just replaced my drivers side air vent... Philips head screw for mine as well.

Efthreeoh · 02-13-2016, 06:29 AM

Button cap is found here. Not sure what color you have. Buy some spares as BMW will probably drop production in a year or two.

My cup holder was secured only with Phillips screws.

SD ///M4 · 02-13-2016, 12:17 PM

Thanks! Looks like both getbmwparts.com and ECS Tuning have them in stock. Definitely going to order some spares!

02-09-2016, 08:59 AM	#1
SD ///M4 ///Multiple 2992 Rep 4,243 Posts Drives: M4 Coupe \| M3 \| Z4M Roadster Join Date: Jan 2011 Location: San Diego, CA iTrader: (1) Garage List 2006 BMW Z4 M Roadster [8.81] 2016 BMW M4 Coupe ( ... [10.00] 2018 BMW M3 (Euro D ... [0.00] 2011 BMW 335is Coup ... [10.00]	Cup holder screws Does anybody know the part number for the third screw that attaches the vent to the plastic post on the cup holder mechanism? Is it the same as the two screws that hold the vent to the dash? My cup holder is broken and when I took it out I noticed that the plastic post was broken and the screw is gone. While I'm at it, does anyone know the part number for the little plastic cap that fits over the top screw by the vent? Thanks! P.S. I tried searching... P.P.S. I have the Ultimate Cup Holder, I just want to fix the stock one. __________________ The Coupe: 2016 M4 \| Sakhir Orange \| Black Full Merino Leather \| CF Trim \| M-DCT \| More \| ED 5/13/16 The Sedan: 2018 M3 \| San Marino Blue \| Black Full Merino Leather \| CF Trim \| M-DCT \| ZCP \| ED 7/18/18 The Roadster: 2006 Z4 \| Interlagos Blue \| Black Extended Nappa Leather \| Carbon Leather Trim \| Purchased 7/19/12 Last edited by SD ///M4; 02-09-2016 at 09:17 AM..
	Appreciate 0 Tweet Quote

02-09-2016, 09:22 AM	#2
SD ///M4 ///Multiple 2992 Rep 4,243 Posts Drives: M4 Coupe \| M3 \| Z4M Roadster Join Date: Jan 2011 Location: San Diego, CA iTrader: (1) Garage List 2006 BMW Z4 M Roadster [8.81] 2016 BMW M4 Coupe ( ... [10.00] 2018 BMW M3 (Euro D ... [0.00] 2011 BMW 335is Coup ... [10.00]	Ok, after a little more searching it appears that the part number for the screw might be 65758235255 and the description is "Torx screw for plastic material". This is from realoem.com. In searching for this part number on this forum I saw references to removing two Torx screws to remove the cupholder, but my screws are black Phillips head screws. __________________ The Coupe: 2016 M4 \| Sakhir Orange \| Black Full Merino Leather \| CF Trim \| M-DCT \| More \| ED 5/13/16 The Sedan: 2018 M3 \| San Marino Blue \| Black Full Merino Leather \| CF Trim \| M-DCT \| ZCP \| ED 7/18/18 The Roadster: 2006 Z4 \| Interlagos Blue \| Black Extended Nappa Leather \| Carbon Leather Trim \| Purchased 7/19/12
	Appreciate 0 Quote

02-09-2016, 03:00 PM	#3
Clearancediver Lieutenant 86 Rep 406 Posts Drives: 2004 Z4 Join Date: Oct 2012 Location: Victoria, BC Canada iTrader: (0)	Just replaced my drivers side air vent... Philips head screw for mine as well. __________________ Sent from my smart phone...
	Appreciate 0 Quote

02-13-2016, 06:29 AM	#4
Efthreeoh General 17199 Rep 18,692 Posts Drives: The E90 + Z4 Coupe & Z3 R'ster Join Date: May 2012 Location: Virginia iTrader: (0)	Button cap is found here. Not sure what color you have. Buy some spares as BMW will probably drop production in a year or two. My cup holder was secured only with Phillips screws. Attached Images __________________ A manual transmission can be set to "comfort", "sport", and "track" modes simply by the technique and speed at which you shift it; it doesn't need "modes", modes are for manumatics that try to behave like a real 3-pedal manual transmission. If you can money-shift it, it's a manual transmission. "Yeah, but NO ONE puts an automatic trans shift knob on a manual transmission."
	Appreciate 1 Quote

02-13-2016, 12:17 PM	#5
SD ///M4 ///Multiple 2992 Rep 4,243 Posts Drives: M4 Coupe \| M3 \| Z4M Roadster Join Date: Jan 2011 Location: San Diego, CA iTrader: (1) Garage List 2006 BMW Z4 M Roadster [8.81] 2016 BMW M4 Coupe ( ... [10.00] 2018 BMW M3 (Euro D ... [0.00] 2011 BMW 335is Coup ... [10.00]	Thanks! Looks like both getbmwparts.com and ECS Tuning have them in stock. Definitely going to order some spares! __________________ The Coupe: 2016 M4 \| Sakhir Orange \| Black Full Merino Leather \| CF Trim \| M-DCT \| More \| ED 5/13/16 The Sedan: 2018 M3 \| San Marino Blue \| Black Full Merino Leather \| CF Trim \| M-DCT \| ZCP \| ED 7/18/18 The Roadster: 2006 Z4 \| Interlagos Blue \| Black Extended Nappa Leather \| Carbon Leather Trim \| Purchased 7/19/12
	Appreciate 0 Quote