###*** Skyer front lip design POLL #2 ***###

ZeD4Mr · 11-11-2020, 02:19 PM

Hey guys,

We made additional progress on the front lip.

I understand that many wanted the fangs covered on this forum.

However, across all platforms (FB, IG, Zpost etc), it's a 50-50.. It's really hard to have a true winner, almost felt like flipping a coin should do.

But with this tight community that we have, I will not just flip a coin and call it a day.. LOL

One comment swayed me though. By covering the fangs, this lip essentially shorten the "FANG" design of the front. The length of the left/right air dam is now shorten.

So I've modified it to not cover the front of fangs but just cupping the bottom of the fangs upward by 2mm. (like the picture)

This really creates a 3D look to this new lip.

Another option is I shave everything to a flat plane and the front of the fangs is fully exposed, just like other Z4M lips out there?

So your opinion/comment is needed before I finalized the design.

Option 1: This looks fine, let's go ahead..

Option 2: No cupping. I prefer just a flat mounting with front of the fangs fully exposed

I hope to wrap this design up quickly and have the production piece to be installed on the Skyer car before the end of Nov.

The whole lip picture & design will be revealed hopefully next week..

If all goes with the plan..

We might do a launch Group Buy in Decemeber..

Thanks in advance for commenting/voting..

.

racerbruce · 11-11-2020, 02:46 PM

Thank you ZeD!

ZeD4Mr · 11-16-2020, 12:59 PM

Thank you guys for all the input and comments. We are finalizing this lip design.

We are going to make a production piece and install onto the Skyer car.

Lots of pictures will be taken..

Hopefully, we can get all that done by the end of this month.

Launch Group Buy should happen in Dec.

Let me know if you might be interested in this so I can gauge production slots at the manufacturer side.

cheers..

Jordan

RossBMWZseries · 11-16-2020, 10:17 PM

You already know Jordan... count me in please

ZeD4Mr · 11-24-2020, 02:58 PM

More progress..

Let's hope we can start Launch Group buy in December..

.

racerbruce · 11-24-2020, 03:08 PM

Racerbruce is interested.

F360C · 11-27-2020, 09:52 PM

Quote:

Originally Posted by ZeD4Mr

More progress..

Let's hope we can start Launch Group buy in December..

.

Looking good! Still planning the track addition?

ZeD4Mr · 11-28-2020, 01:31 PM

Quote:

Originally Posted by F360C

Quote:

Originally Posted by ZeD4Mr

[SIZE="4"]More progress..

Let's hope we can start Launch Group buy in December..

[/SIZE]

.

Looking good! Still planning the track addition?

Yes, it'll be in 2021. Track splitter will be mounted below this lip..

ZeD4Mr · 12-14-2020, 12:22 PM

Almost there..

Angelito · 12-14-2020, 12:57 PM

Looking like another Skyer Motorsport hit, can't wait until production begins, it will make the front end of our cars look agressive and stylish!!!

View Poll Results: Which design do you prefer for your front lip?
A little upward edge (2mm) to create the 3D look.. (Like the picture attached)	5	71.43%
I just want a flat piece and have the front of the fangs fully exposed.	2	28.57%
Other.. (Comment below in the thread if you pick this option)	0	0%
Voters: 7. You may not vote on this poll

11-11-2020, 02:19 PM	#1
ZeD4Mr Lieutenant Colonel 501 Rep 1,543 Posts Drives: Skyer Z4MR Join Date: Dec 2009 Location: Vancouver, BC, Canada iTrader: (18)	###* Skyer front lip design POLL #2 *### Hey guys, We made additional progress on the front lip. I understand that many wanted the fangs covered on this forum. However, across all platforms (FB, IG, Zpost etc), it's a 50-50.. It's really hard to have a true winner, almost felt like flipping a coin should do. But with this tight community that we have, I will not just flip a coin and call it a day.. LOL One comment swayed me though. By covering the fangs, this lip essentially shorten the "FANG" design of the front. The length of the left/right air dam is now shorten. So I've modified it to not cover the front of fangs but just cupping the bottom of the fangs upward by 2mm. (like the picture) This really creates a 3D look to this new lip. Another option is I shave everything to a flat plane and the front of the fangs is fully exposed, just like other Z4M lips out there? So your opinion/comment is needed before I finalized the design. Option 1: This looks fine, let's go ahead.. Option 2: No cupping. I prefer just a flat mounting with front of the fangs fully exposed I hope to wrap this design up quickly and have the production piece to be installed on the Skyer car before the end of Nov. The whole lip picture & design will be revealed hopefully next week.. If all goes with the plan.. We might do a launch Group Buy in Decemeber.. Thanks in advance for commenting/voting.. . Attached Images __________________ FB Group-- > fb.com/groups/z4group Instagram --> @Skyermotorsport FB Page-- > fb.com/Skyermotorsport Last edited by ZeD4Mr; 11-11-2020 at 02:30 PM..
	Appreciate 0 Tweet Quote

11-11-2020, 02:46 PM	#2
racerbruce Brigadier General 3852 Rep 3,004 Posts Drives: 21 X3 & 13 335is E93 Join Date: Dec 2009 Location: Seattle iTrader: (1)	Thank you ZeD! __________________ Racerbruce
	Appreciate 0 Quote

11-16-2020, 12:59 PM	#3
ZeD4Mr Lieutenant Colonel 501 Rep 1,543 Posts Drives: Skyer Z4MR Join Date: Dec 2009 Location: Vancouver, BC, Canada iTrader: (18)	We are almost done.. Thank you guys for all the input and comments. We are finalizing this lip design. We are going to make a production piece and install onto the Skyer car. Lots of pictures will be taken.. Hopefully, we can get all that done by the end of this month. Launch Group Buy should happen in Dec. Let me know if you might be interested in this so I can gauge production slots at the manufacturer side. cheers.. Jordan Attached Images __________________ FB Group-- > fb.com/groups/z4group Instagram --> @Skyermotorsport FB Page-- > fb.com/Skyermotorsport
	Appreciate 0 Quote

11-16-2020, 10:17 PM	#4
RossBMWZseries Major 224 Rep 1,130 Posts Drives: '11 E92 328i LCI & '06 Z4MR Join Date: Jun 2014 Location: San Juan TX iTrader: (1) Garage List 2006 BMW Z4M Roadster [7.00]	You already know Jordan... count me in please
	Appreciate 0 Quote

11-24-2020, 02:58 PM	#5
ZeD4Mr Lieutenant Colonel 501 Rep 1,543 Posts Drives: Skyer Z4MR Join Date: Dec 2009 Location: Vancouver, BC, Canada iTrader: (18)	More progress.. Let's hope we can start Launch Group buy in December.. . Attached Images __________________ FB Group-- > fb.com/groups/z4group Instagram --> @Skyermotorsport FB Page-- > fb.com/Skyermotorsport Last edited by ZeD4Mr; 11-24-2020 at 03:06 PM..
	Appreciate 0 Quote

11-24-2020, 03:08 PM	#6
racerbruce Brigadier General 3852 Rep 3,004 Posts Drives: 21 X3 & 13 335is E93 Join Date: Dec 2009 Location: Seattle iTrader: (1)	Racerbruce is interested. __________________ Racerbruce
	Appreciate 0 Quote

12-14-2020, 12:22 PM	#9
ZeD4Mr Lieutenant Colonel 501 Rep 1,543 Posts Drives: Skyer Z4MR Join Date: Dec 2009 Location: Vancouver, BC, Canada iTrader: (18)	Almost there.. Attached Images __________________ FB Group-- > fb.com/groups/z4group Instagram --> @Skyermotorsport FB Page-- > fb.com/Skyermotorsport
	Appreciate 0 Quote

12-14-2020, 12:57 PM	#10
Angelito BMW Enthusiast 29 Rep 59 Posts Drives: 07 E86 Z4MC, 05 E46 330i Join Date: Oct 2015 Location: Texas iTrader: (0)	Looking like another Skyer Motorsport hit, can't wait until production begins, it will make the front end of our cars look agressive and stylish!!!
	Appreciate 0 Quote