|
|
SUPPORT ZPOST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
Post Reply |
|
Thread Tools | Search this Thread |
07-21-2010, 03:48 PM | #1 |
Lieutenant Colonel
47
Rep 1,855
Posts |
Exhaust tips too close to bumper cutouts?
How far does everyone typically have their exhaust tips from the top of the tip cutouts? I have mine about 7mm from the cutouts, and although I do not have any burn issues yet, I'm wondering if the bumper/paint can withstand this type of temperature. I have the Rogue Engineering exhaust tips that are a bit larger in diameter than stock.
Has anyone noticed any problems after a hard day auto-x or tracking?
__________________
///M Coupe: RPI Scoop, OE Strut, CDV, Volk RE30, SS Brake Lines, Stromung Exhaust |
07-21-2010, 04:55 PM | #2 |
Lieutenant General
2387
Rep 12,635
Posts
Drives: Z4 M, X5, GX460
Join Date: Apr 2008
Location: CT
iTrader: (100)
Garage List E86 Z4 M [10.00]
F15 X5 xDrive35i [9.17] F10 550i (Retired) [9.17] F25 X3 xDrive35i (R ... [9.43] E82 135is (Retired) [9.53] E85 Z4 M (Retired) [9.41] E90 328i xDrive (Re ... [9.25] E86 Z4 3.0si (Retired) [8.93] |
my bastuck exhaust initially touched the bumper which obviously caused the paint to melt. i fixed the issue by throwing in some washers between the bolts and nuts to bring it down a bit. it now sits about 1/3" from the cutout which is pretty close to 7mm and I've yet to see any issues so I think you'll be fine. But to be safe, you can put in some washers too.
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|