|
|
SUPPORT ZPOST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
Post Reply |
|
Thread Tools | Search this Thread |
05-24-2019, 07:17 AM | #1 |
Captain
939
Rep 709
Posts
Drives: 06 Black Sapphire Z4MR
Join Date: Jul 2018
Location: Ontario
|
Rear wheel clearance for 10.5" wheel
I ran into the issue of fitting my new-to-me TE37s.
When the car was lowered off the lift, the tire and wheels were hitting the inner fender. Now the camber will be lowered but even if my tech got my camber arms as short as possible, the stock wheels/tire is already pretty damn close. Anyone actually know the best fitting offset for anyone running 10.5" wheels? Your help is much appreciated
__________________
Revolution of our Times
I will return to the track, one day. |
05-24-2019, 11:52 AM | #3 |
Captain
939
Rep 709
Posts
Drives: 06 Black Sapphire Z4MR
Join Date: Jul 2018
Location: Ontario
|
its a +30 so certainly i need to move out at least 10-12mm
__________________
Revolution of our Times
I will return to the track, one day. |
Appreciate
0
|
05-24-2019, 11:59 AM | #4 |
Lieutenant
191
Rep 515
Posts |
|
Appreciate
0
|
05-28-2019, 01:01 PM | #5 |
New Member
3
Rep 7
Posts |
I used to have TE37s 18x10.5 ET 22. Would have to lookup the camber and ride height at that time but had no clearance issues on track.
__________________
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|