Quote:
Originally Posted by Jackal
Mostly stock. I run camber washers on the front to achieve an almost 3 degrees negative camber up front.
The wheels all have a 35 offset, and I run a 10mm spacer in the rear and a 5 mm spacer up front.
|
So you're running the Turner washers or something else?
Did you need the 5mm to clear the stock spring or to move the wheel out cause wider track?
I pulled the trigger on a set of 18x9.5 with 265-35-18 PSS as my street set-up. Apex recommended a 12mm out back and wait and see for the front. Not too late to get front spacer if it's for sure needed
Funny I have bought wheels and tires and turns out the title is a little complicated. So I am still looking for an Interlagos Z4MC. The cleaner the better.
Carl
808-747-0138