Quote:
Originally Posted by XMetal
Quote:
Originally Posted by milamookie
I have a chance at buying some Forgestar F14's but I'm concerned that they are too aggressive at the front. I'm on H&R springs lowered about an inch. Can anyone comment on whether I'll see any rubbing? I'm not interested in fender rolling or camber adjustments.
Front: 19X9 ET30 with 235/30/19 Nitto NT05's
Rear: 19X10 ET18 with 265/30/19 Nitto NT05's
|
These definitely look very aggressive offsets. While I don't have this setup, but just from experience on my setup, that's a tough fit without doing some camber/fender roll. In addition, A few things I don't like about this setup:
1. Stretched tires - those tire widths are a tad bit on the narrow end for the wheel widths
2. Different Front/Rear rolling diameters - this may throw off stability/traction control? This can be somewhat mitigated by using 235/35 up front, but that may worsen the rub factor?
|
Thanks XMetal. I share all the same concerns. To me the stretched tire width and incorrect (too thin) profile on the fronts are a signal that fitment on the front is too aggressive. I'd really like to pick these up but don't want to risk them not fitting properly. From what I read, if you're going to do a 9" wheel in the front you better get the offsets dead on.