Does anyone see any issues with running the below 19 inch setup with larger profiles and slightly larger than stock OD?
My Wheels are HRE FF01:
Front: 19 x 8.5 ET 30
Rear: 19 x 10 ET 40 (w/12 mm spacer)
Tires I'd like to run are MPSS's
Front: 225/40/R19
Rear: 265/35/R19
I'm lowered on H&R springs (25 mm) and will probably go slightly lower with coil overs in the future.
I went with the slightly narrower tire due to the aggressive offsets and MPSS tread width being wider than other brands. The proposed larger profiles (40 & 35) will get me closer to the stock overall diameter albeit just a tad larger. Per my calculations using Michelin data the overall tire diameters will be 5.1 mm (front) and 7.6 mm (rear) larger than stock. I'm not a track guy and mainly do occasional spirited street driving.
|