View Single Post
      05-08-2022, 12:13 PM   #6

Drives: 2006 Z4MR, E60 M5 6MT
Join Date: Jul 2020
Location: AZ

iTrader: (0)

There should be a plus symbol on the reservoir. And yeah you can apply 12v directly to the leads to trigger the motor. Reverse the polarity to switch between raise/lower. If you just added fluid then there might be air in the system so you'll need to raise/lower a few times to clear that out.

There is no reset procedure for the top. The computer always knows its position using all the sensors. Maybe have a check at the fuses but yeah definitely gotta be an issue in the wiring harness.
Attached Images
Appreciate 0