View Single Post
      06-15-2019, 07:34 PM   #4
Azeka1
Track Junkie
Azeka1's Avatar
Albania
235
Rep
390
Posts

Drives: E86 M Coupe
Join Date: Jun 2017
Location: NJ

iTrader: (2)

Garage List
Quote:
Originally Posted by Z4M06 View Post
I used a 1/4" packaging foam board that came with the carbon fiber penal to a make a template. It took about 3 try for me to get it to the shape i wanted. The foam board is very easy to handle, I just scrape it on my concrete drive way to Shape the corner and curb. If I have to do it again I would use a thinner pierce of carbon fiber. The one I got was 3/32 thick it's a little hard to flex.
Great job! I've been thinking to do the same and appreciate the motivation.
__________________
2006 E86 M Coupe | Silver Gray / Imola | JRZ RSTWO | SS Headers | Rouge Exhaust| APEX ARC-8 | APR Aero | Sparco Seats/Belts | Weichers Cage | Solid Motor/Trans/Shifter/SubFrame | Poly Bushings | Race Camber Plates/Arms | CSF Rad/Oil | BW Brake Ducts | Braille Battery | AC/EGR Delete | 3,100lbs
1991 SW20 MR2 Turbo | Widebody | 400WHP/355TRQ | 2017 Audi Q7 | 2010 VW CC 2.0T
Gone: 2014 Audi A6 | 2011 G37 S Coupe 6MT | 2004 G35 Coupe