Quote:
Originally Posted by doozyj
I love the TE37s! What are the correct offsets for the Z4M without having the roll or pull the fenders?
Car looks awesome, totally bad ass!
|
Thanks for the compliment.
It will depend on the suspension set up you run.
With the H&R springs I ran the following with very minor rub on the plastic liner to the rear fenders:
Front 19X8.5 et 40 w/ 245/35/19 tires
Rear 19x10 et 25 w/ 275/30/19 tires
The rubbing in the rear would only happen when the suspension was under full compression in tight turns at high speed.
The front offsets I am running now are good as long as you have camber plates, and use at least -2.5 degrees. Without the more aggressive camber adjustment these fronts will rub. With the camber adjustment, there is no rubbing at all.
Current front set-up: 19x8.5 et 30 w/ 245/35/19 tires.