Quote:
Originally Posted by kyriian
Hello
During my removal of VANOs, following BESIAN systems procedure to the teeth. I noted an issue
I had TDC lined up at the crank
The timing holes on the cam are pointed up (I did note my exhaust cam is quite a bit off) so I rotated the cam to point up
Took the VANOS off, and noted the spline gear on the exhaust side is fully inside the exhaust hub,instead of all the way out per the BESIAN procedure
Does it matter where it is on removal? as I have to replace the exhaust hub and chain guide anyways which means I have to remove the exhaust spline.
|
You might want to post your question on
https://nam3forum.com/forums/forum/m.../e46-2001-2006
There are a lot more S54 owners on that forum than here.
Quote:
Originally Posted by vt100
When I was doing it 3 years back the spline gear on the exhaust side was half way in. Didn't have any issue after reassembling.
PS: was going to suggest to call Raj but just realized that he passed away lately RIP...
|
Really sorry to hear that, Raj was a great guy.
Do you know who is running his business now?