Quote:
Originally Posted by tom @ eas
Module is signal sensing and will switch to that specific input when the camera is activated (triggered by the reserve lamp).
|
So if you had the reverse camera in the "camera" input,
and another camera (lets say front mounted) in the video input with a separate switch to either ground it or power it,
your saying that will work?
So if you mounted a switch in the car, flipped it and the front camera would come on,
and the same when you hit reverse the rear camera would come on,
When you look into these modules it says "camera" and "Video" as inputs, But in theory you could use 2 cameras if you wanted?
I would love that