|
Roof Interior Plastic Trim part
Hey yall. I've replaced my z4 electric top motor but unfortunately one of the splines came off the left side of the release motor. The top is up so it isn't releasing to get the top down to work on it. I have been working to get it back on but no dice thus far.
I *think* the solution is relegated to ripping off the top interior trim piece to then replace the spline and then replace the plastic trim part on the interior of the roof fabric. Is that feasible/recommended.
Know of another alternative to putting the splines on while the roof is up? I can see the splines so know I'm getting them lined up, it just isn't fitting onto the insertion piece.
Pic as reference. The top part on mine is not currently cracked
|