Quote:
Originally Posted by iShimy
Hi,
I have inherited some Vossen CVT, Gloss Graphite, front 19"x8.5 ET40, which are fine.
However the backs are 19"x10 ET50, sadly they don't fit well rubbing the plastic guard on the inside. The tyre shop said I would need to cut the plastic guard and put a spacer for it to work. I freaked out and ran for my life. Any advise / help on what exactly I can do would be appreciated, thanks. They said if I used a 8mm spacer put 265 tyres it will be sitting beyond the fender, by this time I was half way down the road
|
Throw on a spacer to push away from the plastic but run some negative camber to tuck under fender.