|
UPDATE:
After 2 hpde weekends on these new FCABS - AKG Motorworks 66mm 95a Poly (stiffer than my original Powerflex), I now notice about 1mm of sideways play between the inner bushing and the outer bushing as I wiggle the front wheel sideways.
I did notice my brake pedal drop a bit on very tight turns (still had brake pressure), and wondering if this was related. And, do any of you get any play at all on your FCABS?
Driver-side is still solid.
The passenger wheel must get a beating out there. Within one year, went through two wheel bearings, and obviously the Powerflex FCAB failure.
|