View Single Post
      06-25-2019, 09:16 AM   #11
Second Lieutenant
jns_e85's Avatar

Drives: 2004 z4 3.0i & 2006 z4M
Join Date: Feb 2014
Location: Chicago Area

iTrader: (1)

Originally Posted by jns_e85 View Post
Welp. I lied.

Driving today I found that under a sharp bump I will have a brief tire/fender rub at the top of the front tire. Not enough camber I suspect, so good to know that one will want more than -2.8 in the front to fit 275s. Luckily it is only slight. On the flip slide, ALL THE GRIP

I may roll the fenders in the meantime for the clearance needed, as I am almost positive the misses will kill me for spending another $450 on new camber plates to get even more camber...
Forgot to update this. Took it to a shop and they determined camber was sufficient but my front ride height was too low! After a quick height adjustment, all is good

2006 Z4M - Epic Tune / Turner Pulleys / Eventuri / Euro Headers / Section 1 / Custom Stromungs / FA 500 + Camber Bolts / VT Engine Mounts / RE Trans Mounts / AS SSK / Arc 8s
2004 Z4 3.0i - Koni Yellows / Style 224s / AFE / Stromung Exhaust / Z4M Engine Mounts / M3 Trans Mounts / Beisan VANOS / GAS DISA