View Single Post
      04-12-2019, 04:15 PM   #7
Second Lieutenant
jns_e85's Avatar

Drives: 2004 z4 3.0i & 2006 z4M
Join Date: Feb 2014
Location: Chicago Area

iTrader: (1)

So I decided to go with a 275/35 RE-71R square setup on 18x9.5 et35 Apex SM-10s. I removed the camber shims during test fit before tires were installed, as it was too close for my comfort. Now at -2.8 front via camber plates only and it fits nicely

I believe on a normal application there would be no rubbing under full lock, but since my passenger side fender liner and skid plates have taken quite a beating over the last two autocross seasons (read: broke to all hell), I get a *tinsy* bit of rub on the liner under full lock to the left, which I expect to be remedy with a few strategically placed zip ties. Can't wait to feel all the grip!

2006 Z4M - Epic Tune / Turner Pulleys / Eventuri / Euro Headers / Section 1 / Custom Stromungs / FA 500 + Camber Bolts / VT Engine Mounts / RE Trans Mounts / AS SSK / Arc 8s
2004 Z4 3.0i - Koni Yellows / Style 224s / AFE / Stromung Exhaust / Z4M Engine Mounts / M3 Trans Mounts / Beisan VANOS / GAS DISA