[quadna71]

I'm getting ready to replace the OEM pads on my 2005 e86. Yes they are OEM as it only has 55K miles on the clock. I have green EBC sport pads that are going in and I may/may not turn the rotors depending upon the looks of them or if there is much of a lip.

I also ordered both sensors as what i've read online implies I should consider them a wear item and just replace along with the pads.

Lastly, I have two lights illuminated - the BRAKE and the DSC indicators. Both stay on steady and are on as soon as i start the car until I turn it on. The BRAKE indicator is amber (not the red that it turns when I set the parking brake) as is the DSC indicator. Is this just indicative of a worn sensor being triggered? Or is indicative of a certain amount of miles being driven and the system is assuming the brakes are worn? I have found varying and conflicting answers to this online.

If it is either a worn sensor or system mileage countdown that triggers it, will it reset upon replacing the sensor or are there steps I can take with buttons on the dash to reset it once I finish the work?

Thanks!