Quote:
Originally Posted by WangTa
When you guys say "sealer" is that the same as "clear coat"? Getting ready to buy one of these kits and from my research, I was under impression that much like paint - starting with lower grit and ending with higher grit sand paper was in order, then moving to polish and wax - and finally clear coat - was the key?
|
You should not wax the lens before clear coating. The clear coat should be UV resistant to help keep the plastic from getting cloudy due to sun exposure.
IMO you can skip the polish step. The clear coat will fill in the small scratches left by the fine grit sandpaper.