The 20 offset make it very tough. I fitted 9” wide et30 wheels from the back up front and needed about 2.5 degrees to get the top of the tire to tuck into the fender when it compresses. 10mm more toward the fender is fairly significant.
Although, I suppose with enough camber it will work. With the 9.5” wide Apex wheels my effective offset is 28mm, which pushes the wheel 8mm closer to the fender. At 3 degrees of negative camber it barely fits.
__________________
Sitting on a beat-up office chair in front of a 5 year old computer in a basement floor, sipping on stale coffee watching a bunch of meaningless numbers scrolling aimlessly on a dimly lit 19” monitor.
|