[Expert@ApexWheels]

Originally Posted by EMKOOP

Did not get a response on the other Apex thread. Wondering if you gentlemen can answer the below:

http://www.zpost.com/forums/showpost...95&postcount=4

Thanks

Thank you for the message, sorry we missed that reply in the other thread!

We would still recommend the 5mm spacer to clear KW/Ohlins systems up front due to the over "bulkiness" of these kits over stock. The extra 2mm of clearance that you gain with the 19x9.5 ET33 over an ET35 is not sufficient enough to clear the suspension, in most cases.

Although this is also affected by tire size and compound, we would recommend a 5mm spacer just to ensure proper clearance without risk of rubbing on the coilover.

I hope this helps clear up this confusion!


- Max