View Single Post
      06-17-2019, 03:33 PM   #5
Azeka1
Lieutenant
Azeka1's Avatar
286
Rep
431
Posts

Drives: E86 M Coupe
Join Date: Jun 2017
Location: NJ

iTrader: (2)

Garage List
Re Belts - If you look at how Vanne has them mounted, this might work for you. I believe he is using eye bolts that are mounted in the rear bulk head. I also used a similar setup in my Toyota MR2. Keep in mind that most clubs will also require you to use a HANS device if you have a 4+ point harness; so bake that into your cost.
https://www.zpost.com/forums/showpos...&postcount=201



With regards to your brakes: Based on your last post, it seems like your using Hawk HPS street/track pads. Your description sounds like you have serious fade and are probably boiling your fluid. Definitely swap in a true track pad for your track days (like Hawk DTC60) and flush with any 600+ DOT4 Race Fluid and you should be good to go.
__________________
1995 E36 M3 | BMW CCA Club Racer - IP #34 | Gray / Blue / Orange | 261WHP | 2,700lbs
2013 E92 M3 Competition 6MT Slick Top | AW / Fox Red |
2006 E86 M Coupe | Silver Gray / Imola | JRZ RSTWO | APR Aero | Sparco Seats/Belts | Weichers Cage
Gone: 2017 Audi Q7 | 2011 E93 328i 6MT | 2014 Audi A6 | 2010 VW CC 2.0T | 2011 G37 S Coupe 6MT | 2004 G35 Coupe | SW20 MR2 Widebody Turbo
Appreciate 0