Quote:
Originally Posted by 3002 tii
I've read on m3forum how these will work with slider motors (need to use e30 buttons), know anything about that for the Z4? You're supposed to be able to transfer your stock seat rails and motor onto the BK mounts so you can retain adjustability.
How's your visibility? When I first installed mine without sliders I sat too low despite using the higher adjustment points on the side mounts.
|
Regarding mounting to the OEM slider, that would be a different part from this same manufacturer found here:
http://www.bkauto.com/R_9222_Seat_Mo...s_p/r-9222.htm
Apologies as I do not have additional info on that because my plan was to have the stock seat ready for a quick(ish) swap back if I choose to do so.
As for visibility, even with these 'Low Max' system seats, I was able to get a good ride height. I am 6'1 for reference. Tested out at NJMP today and felt so much more connected than the last track day.
------ rear on highest setting and front on second highest setting
Aside from height, please note that these Vios III seats are NARROW and would not work well for anyone over a 34 waist size.