Hello. My car was involved in an accident over a year ago. Small tiny accident no air bags deployed, no new sensors replaced. basically a fender bender from parked. I got the car back and dove right into replacing the heater core. Well after I was done I noticed the air bag light was on.(the airbag light was on before I tackled the heater core just for reference) I tried resetting the system with INPA but I continue to get the same code. I do believe this is hard coded crash data and needs to be reset but I am not 100% sure on how to do this myself. I am an expert on computers but a novice on automobile computer systems. If there is anyone who can point me in the correct direction on how to reset the crash data using a cable and software on my PC PLEASE let me know. Thank you in advance for your time.
Car: 08 BMW Z4 Roadster 3.0i (E85)
Cable: Antibreak Inpa K+CAN K+DCAN OBD2 USBSwitch FT232RQ Cable OBDii
LINK to Amazon
Software I have now: INPA, NCS-Expert, Tool32, WinKFP
Data I have downloaded from the car.
This code or information will not erase and continues to show (did my best to convert to English from German)
E R R O R M E M O R Y
-----------------------------------------------------
Date: 01/18/2023 18:09:15
ECU: ACSM85
Job Status: OK
Variant: ACSM85
-------------------------------------------------------------
RESULT: 1 error in error memory !
-------------------------------------------------------------
93F7 ZK16 / knee airbag front passenger
Error counter: 2
Logistic counter: 40
Mileage 196352km
Power On - Counter 61.00 cycle
System time error - start 14765438.00 sec.
System time error - end -1.00 sec.
Absolute Time Error - Start - Hours -113.00 hrs
Absolute time error - start - minutes -113.00 min.
Absolute time error - start - seconds 19.00 sec.
Absolute time error - start - day -113.00 day
Absolute time error - start - month implausible 0-n
Absolute time error - start - weekday implausible 0-n
Absolute Time Error - Start - Year High Byte 7.00 Year
Absolute Time Error - Start - Year Low Byte 229.00 Year
Absolute time error - start - summer/winter time summer time 0-n
no suitable error symptom
Test conditions met
Error currently present and already saved
Failure would cause a warning lamp to light up
Resistance too small (ZK)
Error code: 93 F7 E0 02 02 28 5F E0 00 3D 00 E1 4D 7E FF FF
FF FF 8F 8F 13 8F FF 07 E5 FF
================================================== ==========
Just in case here it is in German
E R R O R M E M O R Y
---------------------------------------
Date: 18.01.2023 18:09:15
ECU: ACSM85
JobStatus: OKAY
Variant: ACSM85
-------------------------------------------------------------
RESULT: 1 error in error memory !
-------------------------------------------------------------
93F7 ZK16 / Knieairbag Beifahrer
Error counter: 2
Logistic counter: 40
Mileage 196352 km
Power On - Zaehler 61.00 zyklus
Systemzeit Fehler - Beginn 14765438.00 Sek.
Systemzeit Fehler - Ende -1.00 Sek.
Absolutzeit Fehler - Beginn - Stunden -113.00 Std.
Absolutzeit Fehler - Beginn - Minuten -113.00 Min.
Absolutzeit Fehler - Beginn - Sekunden 19.00 Sek.
Absolutzeit Fehler - Beginn - Tag -113.00 Tag
Absolutzeit Fehler - Beginn - Monat unplausibel 0-n
Absolutzeit Fehler - Beginn - Wochentag unplausibel 0-n
Absolutzeit Fehler - Beginn - Jahr High Byte 7.00 Jahr
Absolutzeit Fehler - Beginn - Jahr Low Byte 229.00 Jahr
Absolutzeit Fehler - Beginn - Sommer/Winterzeit Sommerzeit 0-n
kein passendes Fehlersymptom
Testbedingungen erfüllt
Fehler momentan vorhanden und bereits gespeichert
Fehler würde das Aufleuchten einer Warnlampe verursachen
Widerstand zu klein (ZK)
Error code: 93 F7 E0 02 02 28 5F E0 00 3D 00 E1 4D 7E FF FF
FF FF 8F 8F 13 8F FF 07 E5 FF
================================================== ===========
Please help, Thank you in advance for your time. I do apologize if this is in the wrong spot I searched and found a lot of great info but could not seem to find exactly what I needed and was nervous to ruin the module beyond use. better to ask and know then to destroy trying.