|
This is what you have on the board as far as led arrangement. It looks like a mess and can be confusing. Again if you plug it back in after it is apart you can see the leds and which ones are lit up when the dash lights are on. One note, the bottom 4 leds which are the left and right lower corners of the speedo and tach are at right angles to the board. They sort of shine into a clear plastic ring that surrounds the dial. I ended up putting a 5mm led in these spots with the end sanded flat so the light shined out the sides. You will decide how you want to do it. Just putting one of the plcc-2 leds in there will work just fine I am sure as things are pretty bright already.
|