Quote:
Originally Posted by jns_e85
So I finally decided to take a crack at coding, and was able to enable some neat features on my Z4M successfully. However, the main reason I decided to attempt this finally is my OC3 mat has kicked the bucket, and I was informed BMW will not cover replacement (my build is 05/2006).
After a lot of online browsing, I thought I found all the options to adjust, but am still coming up with the error 93C3. After updating the coding using NCSEXPERT, it corrects the error for about a minute then triggers again. Any ideas? Here is what I am showing coding wise, OC3 mat is unplugged
ABG module
Seat Occupancy Detection (SBE1) - nicht_activ
Seat Occupancy Detection (OC3) - nicht_activ
Delay Seat Occupancy Detection - nicht_activ
Passenger Seat Belt Warning Sensor - nicht_activ
Passenger Seat Belt Warning - nicht_activ
Gk/OC3/POL_1 - nicht_activ
I clearly am missing something. Any thoughts?
|
Once you export to man file and sg_coderein for the seat it should throw an error. Check with inpa and see what it says.