Quote:
Originally Posted by CTMP4me
MCS 2-ways with 60mm 6" springs and very short Hyperco helper springs now, maybe .5-1" lower than stock (around 5.5-6" measured at front and rear jacking points) - wheel clears the strut by 5+ mm when I use 5mm spacers behind 9.5" et35, 265 Trofeos clear this setup too even with their fat sidewalls. Tbh I don't know how a perfectly stock, intact fender liner would clear this setup, mine has seen lots of rub over the years near bumper's upper mount point but almost no wear elsewhere closer to center of the car or behind the front axle line.
|
I see my issue at least, KW uses 70mm springs, I already lost more than 5mm than you
Guess I just cut a bit more fender liner or raise the car a bit