View Single Post
      07-18-2020, 12:36 AM   #10
CTMP4me
Private First Class
28
Rep
104
Posts

Drives: '08 Z4MC, '71 240Z with S54
Join Date: Sep 2016
Location: Toronto

iTrader: (0)

Quote:
Originally Posted by kyriian View Post
I am guessing at 23 and camber you manage to clear the fenders.
What suspension setup you on and how low are you. Where are you rubbing on the fender liner. I am suprised you didn't rub on the inside at +30, I rub my coilover at +25 and im only on 245 tires.
MCS 2-ways with 60mm 6" springs and very short Hyperco helper springs now, maybe .5-1" lower than stock (around 5.5-6" measured at front and rear jacking points) - wheel clears the strut by 5+ mm when I use 5mm spacers behind 9.5" et35, 265 Trofeos clear this setup too even with their fat sidewalls. Tbh I don't know how a perfectly stock, intact fender liner would clear this setup, mine has seen lots of rub over the years near bumper's upper mount point but almost no wear elsewhere closer to center of the car or behind the front axle line.
Appreciate 0