[3002 tii]

By the way for anyone who’s doing this install, the oe trunk stoppers have been discontinued and the replacement part does not fit. Easy workaround is to use a Dorman rubber vac cap (p/n 650-007). It has a 1/2” inner diameter so fits perfectly. Also probably overkill but I then used a 5/8” cap on top of the 1/2”.

Pic 1 - no stoppers
Pic 2 - how close trunk lid is to rear glass
Pic 3 - Dorman 1/2” cap
Pic 4 - Dorman 5/8” cap (on top of the 1/2”)
Pic 5 - gap created between trunk and rear glass

(Not sure why site keeps uploading my images wrong orientation but pics 2/3/4 should be portrait and 5 should be landscape)