TM Equal Length Headers

P-Man · 03-27-2011, 01:36 PM

I have been looking for some Euro/CSL headers lately in the classifieds and have found a couple but after looking at the cost for used, buying the o2 sensors and possibly having bungs welded.....I started looking at just buying 'em new.

Came across some interesting buys at Turner Motorsports for some SuperSprint for $2100 and the Turner Equal Length for $1200

Leaning toward the TM's for the advantages of the individual equal length, the ceramic coating and of course, the price. Is anyone running with these? Appreciate any other input or concerns from the forum!

http://www.turnermotorsport.com/p-28...d-headers.aspx

Thanks,
P

inTgr8r · 03-27-2011, 04:35 PM

Why are you looking to buy new sensors?

Also, check out the dyno plot on the Turners.
There's a bad drop off in the middle of the power range that I don't like.

pokeybritches · 03-27-2011, 10:48 PM

Tuner can't guarantee that the headers fit the Z4M without modification, per an email discussion several weeks ago. They didn't say they wouldn't fit, but said they hadn't sold any to Z4M owners who could confirm that they DID fit. I'd been eyeing them as well, so if you go with them please let us know how they work out.

P-Man · 03-28-2011, 08:47 PM

One set of CSL's did not have the sensors included

P-Man · 03-28-2011, 08:49 PM

Guinea Pig......I love it! Someone's got to be an original gangsta I guess!

P-Man · 03-30-2011, 09:30 PM

OK, the TM's are on order and should be installed by the end of next week. Stay tuned for more details as they come.......

mfanatic325 · 03-30-2011, 09:52 PM

Interesting........
Please do before-and-after dynos

onebluemcm · 03-31-2011, 06:45 AM

Quote:

Originally Posted by P-Man

OK, the TM's are on order and should be installed by the end of next week. Stay tuned for more details as they come.......

Definitely staying tuned here - please so let us know. I'm the one that had the email conversation with them. I asked about fitment because they sell them to fit M3 and Z4M and as we all know here, there are differences in actuality. I was told that yes that is how they market them but no one had ever sold them to a Z4M owner and they don't know if they will fit. I didn't proceed because even if they are cheaper than than other aftermarket headers, I didn't want to have to beat $1400 headers into submission to fit. So you experience will be enlightening for sure. Good luck, keep us updated - please!

mousitch · 04-14-2011, 10:14 AM

Quote:

Originally Posted by P-Man

OK, the TM's are on order and should be installed by the end of next week. Stay tuned for more details as they come.......

Any word on the fitment? I think Im gonna order the stepped version if they fit........

P-Man · 05-03-2011, 03:27 PM

After weeks of waiting for these to be made and shipped, Customer Service at TMS.....if you want to call it that, said they decided to discontinue making these. Sorry guys....I'm back to looking for something else and always looking for ideas if you got 'em!

MIKe86 · 05-03-2011, 04:07 PM

Quote:

Originally Posted by P-Man

After weeks of waiting for these to be made and shipped, Customer Service at TMS.....if you want to call it that, said they decided to discontinue making these. Sorry guys....I'm back to looking for something else and always looking for ideas if you got 'em!

Wtf, seriously how do these companies stay in business?? Tell me they had your payment the entire time and you were just sitting there waiting.. Smh.

03-27-2011, 01:36 PM	#1
P-Man Enlisted Member 8 Rep 43 Posts Drives: 2006 Z4M Roadster Join Date: Oct 2010 Location: Seattle iTrader: (2)	TM Equal Length Headers I have been looking for some Euro/CSL headers lately in the classifieds and have found a couple but after looking at the cost for used, buying the o2 sensors and possibly having bungs welded.....I started looking at just buying 'em new. Came across some interesting buys at Turner Motorsports for some SuperSprint for $2100 and the Turner Equal Length for $1200 Leaning toward the TM's for the advantages of the individual equal length, the ceramic coating and of course, the price. Is anyone running with these? Appreciate any other input or concerns from the forum! http://www.turnermotorsport.com/p-28...d-headers.aspx Thanks, P __________________ 2006 Z4M H&R Coilovers l SS 3 Piece Engine & Rear Braces l RE Tranny Mounts l Zeck CDV l UUC Evo3 & Performance Knob l Ram Air l APR Splitter w/ Rods l ACS 2-Piece Wing l AA Gen IV Headers l RE X-Pipe l Remus Exhaust l ESS Flash l StopTech Stainless Lines l K&N
	Appreciate 0 Tweet Quote

03-27-2011, 04:35 PM	#2
inTgr8r Lieutenant General 2432 Rep 11,667 Posts Drives: M2 Comp Join Date: Mar 2006 Location: Toronto iTrader: (10)	Why are you looking to buy new sensors? Also, check out the dyno plot on the Turners. There's a bad drop off in the middle of the power range that I don't like. __________________ '21 M2C Hockenheim Silver '18 718 Cayman S Lava Orange (sold) '13 E92 M3 Santorini Blue (sold) '07 Z4 M Coupe Alpine White (sold)
	Appreciate 0 Quote

03-27-2011, 10:48 PM	#3
pokeybritches Colonel 479 Rep 2,782 Posts Drives: ESS/G-Power Z4M, VF Z4, 996tt Join Date: Sep 2009 Location: Los Angeles iTrader: (12) Garage List 2006 BMW Z4M [10.00] 2006 BMW Z4M [8.50] 2003 BMW Z4 3.0i [9.00]	Tuner can't guarantee that the headers fit the Z4M without modification, per an email discussion several weeks ago. They didn't say they wouldn't fit, but said they hadn't sold any to Z4M owners who could confirm that they DID fit. I'd been eyeing them as well, so if you go with them please let us know how they work out. __________________ VF Engineering Z4 3.0i, ESS Z4M, G-Power Z4M, 996 Turbo
	Appreciate 0 Quote

03-28-2011, 08:47 PM	#4
P-Man Enlisted Member 8 Rep 43 Posts Drives: 2006 Z4M Roadster Join Date: Oct 2010 Location: Seattle iTrader: (2)	One set of CSL's did not have the sensors included __________________ 2006 Z4M H&R Coilovers l SS 3 Piece Engine & Rear Braces l RE Tranny Mounts l Zeck CDV l UUC Evo3 & Performance Knob l Ram Air l APR Splitter w/ Rods l ACS 2-Piece Wing l AA Gen IV Headers l RE X-Pipe l Remus Exhaust l ESS Flash l StopTech Stainless Lines l K&N
	Appreciate 0 Quote

03-28-2011, 08:49 PM	#5
P-Man Enlisted Member 8 Rep 43 Posts Drives: 2006 Z4M Roadster Join Date: Oct 2010 Location: Seattle iTrader: (2)	Guinea Pig......I love it! Someone's got to be an original gangsta I guess! __________________ 2006 Z4M H&R Coilovers l SS 3 Piece Engine & Rear Braces l RE Tranny Mounts l Zeck CDV l UUC Evo3 & Performance Knob l Ram Air l APR Splitter w/ Rods l ACS 2-Piece Wing l AA Gen IV Headers l RE X-Pipe l Remus Exhaust l ESS Flash l StopTech Stainless Lines l K&N
	Appreciate 0 Quote

03-30-2011, 09:30 PM	#6
P-Man Enlisted Member 8 Rep 43 Posts Drives: 2006 Z4M Roadster Join Date: Oct 2010 Location: Seattle iTrader: (2)	OK, the TM's are on order and should be installed by the end of next week. Stay tuned for more details as they come....... __________________ 2006 Z4M H&R Coilovers l SS 3 Piece Engine & Rear Braces l RE Tranny Mounts l Zeck CDV l UUC Evo3 & Performance Knob l Ram Air l APR Splitter w/ Rods l ACS 2-Piece Wing l AA Gen IV Headers l RE X-Pipe l Remus Exhaust l ESS Flash l StopTech Stainless Lines l K&N
	Appreciate 0 Quote

03-30-2011, 09:52 PM	#7
mfanatic325 ///M-fanatic 193 Rep 3,885 Posts Drives: '01 911 Turbo Join Date: Oct 2007 Location: Cupertino, CA. iTrader: (23)	Interesting........ Please do before-and-after dynos
	Appreciate 0 Quote

05-03-2011, 03:27 PM	#10
P-Man Enlisted Member 8 Rep 43 Posts Drives: 2006 Z4M Roadster Join Date: Oct 2010 Location: Seattle iTrader: (2)	After weeks of waiting for these to be made and shipped, Customer Service at TMS.....if you want to call it that, said they decided to discontinue making these. Sorry guys....I'm back to looking for something else and always looking for ideas if you got 'em! __________________ 2006 Z4M H&R Coilovers l SS 3 Piece Engine & Rear Braces l RE Tranny Mounts l Zeck CDV l UUC Evo3 & Performance Knob l Ram Air l APR Splitter w/ Rods l ACS 2-Piece Wing l AA Gen IV Headers l RE X-Pipe l Remus Exhaust l ESS Flash l StopTech Stainless Lines l K&N
	Appreciate 0 Quote