|
|
SUPPORT ZPOST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
Post Reply |
|
Thread Tools | Search this Thread |
05-26-2011, 02:36 PM | #1 |
Major
148
Rep 1,099
Posts |
FS or For Trade 19" DPE R06 Variant S Wheels (19x8 Front 19x10 Rear) with 3 tires 800
Here is the whole story about the wheels folks. Up for sale is a set of 19" DPE R06 Variant S Wheels. The wheels were on my E46 325i Sedan. I purchased them from Dave96DCM an E46fanatic about a year and a half ago for $1,500. When I purchased them I had 3 of the wheels repaired at Rim and Wheel Works in Waltham. (100 bucks and change per wheel) (Bends were on the inside of the wheels) and replaced all of the tires. The two front tires (235/40/19) I bought from Gary at tirerack when they were phasing out the Bridgestone Re01r tires. (Paid about $220.00) For the two rears I tossed on two Toyo Proxies T1-S (275/30/19) that I picked up off of craigslist. One of the rear tires needs immediate replacement. I ran the wheels for about 5 months. All of the wheels have been repaired before, with one wheel having a small crack repaired. (not repaired during my ownership) There is a slight wheel hop and it results in a slight vibration at about 60mph. If you do about 65 you don't notice it at all. The wheels are Gunmetal in color and the rivets have been removed. Replacement Rivets cost $40 from DPE. The wheels Front backspacing is 6.0 for the rim and 6.25 with the 245/35 on it, 7.375 in the rear, the tire and rim are even. The wheels only fit oem BMW center caps.(I do have original caps) I ran these wheels on a Sedan. Note the car did have the fenders rolled. Purchase Price $1,500 Repairs 300 Tires 320 Approximate Total Spent 2,120 I am asking for $800 obo for these wheels. I am open for trades (Carbon Leather Trim or Black coupe headliner + cash) |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|