|
|
SUPPORT ZPOST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
Post Reply |
|
Thread Tools | Search this Thread |
05-14-2015, 12:14 PM | #1 |
Lieutenant General
2285
Rep 12,565
Posts
Drives: Z4 M, X5, GX460
Join Date: Apr 2008
Location: CT
iTrader: (99)
Garage List F15 X5 xDrive35i [8.75]
E86 Z4 M [10.00] F10 550i (Retired) [9.17] F25 X3 xDrive35i (R ... [9.43] E82 135is (Retired) [9.50] E85 Z4 M (Retired) [9.41] E90 328i xDrive (Re ... [9.25] E86 Z4 3.0si (Retired) [9.24] |
TCK DA Koni Adjustment Knobs Won't Fit
Just picked up a new set of TCK DA's for my 3.0si. Install went fine but I noticed the top adjustment knobs won't fit because the strut towers openings come in contact with them. The only way to get them to fit would be to dial out some camber which is something I don't want to do. I managed to make adjustments using needle nose pliers but is there a better solution?
I found this old thread that dealt with the same issue. Any idea where I would find a tool like this? Else I might just cut out the tip of a flat head screwdriver. Apparently Ron Stygar used to make a deal for this very issue but he's no longer selling (or reachable). |
05-14-2015, 06:27 PM | #2 |
Bimmer Noob
30
Rep 566
Posts |
Post if you find one please. I use needle nose pliers as well.
Forgot to mention, get http://www.rogueengineering.com/rogue/KONI_ADJ.html. Makes adjusting the rears a no brainer.
__________________
08 Z4MC /// DKF Exhaust, Stoptech 6/4 BBK, TCK Coilovers, Strong-Strut, Apex EC-7's, APR Splitter/Wing, AFE Intake, Underdrive pulleys, AS SSK, Jaffster, UUC Tranny Mounts, Matte Grill, RPI Scoop, CF Badges Last edited by a_riddler; 05-14-2015 at 06:34 PM.. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|