|
|
SUPPORT ZPOST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
Post Reply |
|
Thread Tools | Search this Thread |
07-19-2017, 02:45 PM | #1 |
New Member
0
Rep 15
Posts |
FS: Navigation Harness - DIY style.
This consists of the of the plugs needed to retro fit a navigation system. This is not a one piece harness that was previously available from BMW, this has been cut out of my 2003 3.0i Z4 E85. It has to be cut out as it's a combined harness when fitted from factory. All plugs are included, and I'll also include 2 meters of RJ-45 cable (which has 4 twisted pairs in it's core so 8 wires altogether) which should help with the re joining. All colour coded so with a little bit of know how you should be able to reconnect the wiring with minimal effort. Again, located in the UK - how ever since these are light and small postage worldwide is INCLUDED in the price. Please note.... the connecting block shown here circled in RED is NOT part of the included wiring, although the wires that were in that block and attached to the sat nav wiring are. |
Post Reply |
Bookmarks |
|
|