|
|
SUPPORT ZPOST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
Post Reply |
|
Thread Tools | Search this Thread |
03-27-2014, 08:51 PM | #1 |
Lieutenant Colonel
502
Rep 1,543
Posts |
- What's a good type of Torque Wrench?
I DIY a lot more after owning the Z. Armed with lots of info on here, I've ventured into areas where I wouldn't before. Most of these small jobs are very rewarding. So I want to invest in a set of torque wrenches. 1/2", 3/8" and 1/4". What are the different types? I've seen some are $130+ each and I found a set can be had for $50 for all 3. What gives?
http://www.ebay.com/itm/LOT-OF-3-PIT...-/231074071788 I already have a click-type super heavy duty ones for wheels. These will be use for other applications. So my trusted ZPost community, some insight? |
03-27-2014, 11:00 PM | #2 |
Major
320
Rep 1,061
Posts |
I would buy a precision instruments torque wrench. Life is too short for cheap tools! (that break)
Check out here http://www.torqwrench.com/ I own 2 micrometer models but they also make some nice split beam designs. Last edited by ferrarif1; 03-27-2014 at 11:03 PM.. Reason: fixed link |
Appreciate
0
|
03-27-2014, 11:49 PM | #3 |
Midlife Crises Racing Silent but Deadly Class
1821
Rep 5,337
Posts
Drives: 2006 MZ4C, 2021 Tesla Model 3
Join Date: Oct 2007
Location: Welcome to Jamaica have a nice day
|
$50 for 3 torque wrench?! I can't get a decent one for $100. Snap on torque wrenches run $350+.
Run away from the $50 or less torque wrench.
__________________
Sitting on a beat-up office chair in front of a 5 year old computer in a basement floor, sipping on stale coffee watching a bunch of meaningless numbers scrolling aimlessly on a dimly lit 19” monitor.
|
Appreciate
0
|
03-28-2014, 07:45 AM | #4 |
Major
151
Rep 1,134
Posts
Drives: '07 M Roadster
Join Date: Dec 2011
Location: Warner Robins, GA
|
Two simple rules to live by, "you get what you pay for" and "buy once, cry once". Go with a brand that has a reputation for quality not just in the product, but their customer service. Snap-On, Craftsman, and Matco come to mind. Craftsman being on the lower end of the spectrum, but their warranty and replacement policy is excellent.
__________________
|
Appreciate
0
|
03-28-2014, 08:02 AM | #5 |
Mechanical Engineer
96
Rep 1,025
Posts |
Craftsman snap wrenchs are exactly the same as the ones they sell at Harbor Freight, take one apart and you'll see what I mean. They're fine for wheels and such, but I wouldn't trust one for anything less than 20 ft lb.
Precision instruments is definitely the way to go. They're the manufacturer for SnapOn torque wrenches. |
Appreciate
0
|
03-28-2014, 08:49 AM | #6 |
Lieutenant
9
Rep 452
Posts |
If you are planning to do a large range of work, you may consider one for each drive (1/4, 3/8 and 1/2) with appropriate torque ranges. The 1/2 would be suitable for wheel lugs, the 1/4 for delicate engine work such as header nuts, and the 3/8 for everything in between. You will also need to find a cross-refernce guide (easily found on the Internet for free) for conversion from Nm to Ft-lbs.
__________________
Vibra Technics engine mounts / Rogue trans mounts / Stoptech brakes / original owner
|
Appreciate
0
|
03-28-2014, 03:15 PM | #7 | |
Lieutenant Colonel
80
Rep 1,663
Posts |
Quote:
Beautifully made in the US. Split beam is better than traditional, as you don't have to reset after each use so it will stay accurate longer.
__________________
|
|
Appreciate
0
|
04-06-2014, 08:16 PM | #9 | |
Second Lieutenant
5
Rep 231
Posts |
Quote:
|
|
Appreciate
0
|
04-06-2014, 08:37 PM | #10 | |
Colonel
187
Rep 2,138
Posts
Drives: Me
Join Date: Oct 2007
Location: Virginia Beach
|
Quote:
I own several torque wrenches. 0-600ft/lbs. dial (it's four feet long) 0-150ft/lbs. clicky (mainly for wheels) 0-250ft/lbs. dial 0-100ft/lbs. dial 0-400 in/lbs. dial 0-200 in.lbs. dial Always buy good quality products, not necessarily top of the line. If you have a clicky type wrench, ALWAYS set the value back to zero. Never store your wrench with the torque set. This will stretch the beam and have it go out of calibration very, very quickly. I use to run a calibration lab in the Navy during one tour... |
|
Appreciate
0
|
04-10-2014, 07:52 PM | #11 |
First Lieutenant
30
Rep 317
Posts |
my craftsman died in a year, and was not covered on a warranty... I went with harbor freight figuring I could replace it about 5 times for the price of the craftsman... cheap yes, seems to be accurate when compared to friends torque wrenches, hasnt broken in 3 years, but I havent used it *that much* lately.
__________________
K&W v3, APR splitter, magnaflow axle back35% tint, stubby antenna, Jet black, and interlagos blue stock wheels, clutch delay delete, illuminated ZHP shift knob, Leather Z m shift boot, and arm rest.
|
Appreciate
0
|
04-15-2014, 03:38 PM | #12 | |
///Multiple
2992
Rep 4,243
Posts
Drives: M4 Coupe | M3 | Z4M Roadster
Join Date: Jan 2011
Location: San Diego, CA
iTrader: (1)
Garage List 2006 BMW Z4 M Roadster [8.81]
2016 BMW M4 Coupe ( ... [10.00] 2018 BMW M3 (Euro D ... [0.00] 2011 BMW 335is Coup ... [10.00] |
Quote:
It's currently on sale for $40, 50% off from it's regular price, if anyone wants to bother with this one. I should also add that I also have a 1/2" Craftsman torque wrench that's been working fine for 20 years, although it's not the same style as the one they currently sell.
__________________
The Coupe: 2016 M4 | Sakhir Orange | Black Full Merino Leather | CF Trim | M-DCT | More | ED 5/13/16
The Sedan: 2018 M3 | San Marino Blue | Black Full Merino Leather | CF Trim | M-DCT | ZCP | ED 7/18/18 The Roadster: 2006 Z4 | Interlagos Blue | Black Extended Nappa Leather | Carbon Leather Trim | Purchased 7/19/12 Last edited by SD ///M4; 04-16-2014 at 01:12 PM.. |
|
Appreciate
0
|
04-15-2014, 08:13 PM | #13 | |
Second Lieutenant
5
Rep 231
Posts |
Quote:
CRAFTSMAN LIMITED WARRANTY FOR ONE YEAR from the date of sale, this product is warranted against defects in material or workmanship. WITH PROOF OF SALE, a defective product will receive free repair or replacement at option of seller. If this product needs re-calibration within ninety (90) days from the date of purchase, it will be re-calibrated free of charge. After 90 days you must pay for re-calibration. This ONE YEAR warranty is void if this product is ever used while providing commercial services or if rented to another person. For 90 DAY commercial and rental use terms, see the Craftsman warranty web page. WARRANTY SERVICE To obtain warranty coverage, return a defective product with proof of sale to the retailer from which it was purchased for free repair or replacement at option of seller. |
|
Appreciate
0
|
04-16-2014, 07:42 AM | #14 |
Mechanical Engineer
96
Rep 1,025
Posts |
That may be what the warranty says, but Craftsman likes to play games on warrantying measurement and inspection tools. Torque wrenches, multimeters, gauges, anything like that is a toss up. Not like hand tools, on which I've never had even the slightest problem getting a replacement.
|
Appreciate
0
|
04-16-2014, 07:15 PM | #15 | |
Lieutenant Colonel
502
Rep 1,543
Posts |
Got busy and never reply to all the good feedback guys. Gotta do more research on this topic for sure.
Quote:
Should I own some ft/lbs and some in/lbs? |
|
Appreciate
0
|
04-16-2014, 07:57 PM | #16 |
Colonel
187
Rep 2,138
Posts
Drives: Me
Join Date: Oct 2007
Location: Virginia Beach
|
Ideally, for a nominal torque of 18-20ft/lbs, you want a Torque Wrench (TW) with that value in the middle of the range. That said, you can't get a TW for every scenario so you get a TW will do you the most good. A 0-50ft/lbs would be the most appropriate but the think the closest thing would be a 0-60ft/lbs and that would be acceptable with most TW's.
I use my in/lbs TW's for those lower values, but you really have to ask yourself will you be using a in/lbs TW one or twice or a lot more than that? If its one or twice, is it worth it? Can I fudge it a little with a TW at the lower end of the scale? With a good quality TW you could do it safely. It really all depend on WHAT you are torquing down. Does it have to be that precise? Those are the questions you have to ask yourself. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|