|
|
SUPPORT ZPOST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
Post Reply |
|
Thread Tools | Search this Thread |
02-02-2013, 04:01 PM | #1 |
First Lieutenant
23
Rep 347
Posts
Drives: 2006 BMW M COUPE
Join Date: Dec 2008
Location: Charlottetown PEI, Canada
|
RIGHT WIRES - For Boost Gauge on Dash
Red and Grey - dimmer 12 v+ = Red for Gauge
Green with Blue stripe - 12v + when car on start and run = Green for gauge Brown - ground = connected to Black wire for gauge Placed wires around bared area of above - checked with Voltmeter - soldered and wrapped with tape - go to connectors. On firewall to the passenger side of car near where steering column goes through there is a 2" opening with nothing through it but there is a rubber cover you can punch a hole in for the hose to the gauge. From inside the car through the gauge mount you can feed the hose out through taped to a coat hanger, feed it through the rubber seal and put it back in place. Gauge should be here first of the week then I get to cut holes !
__________________
2006 M COUPE - 380 total production, 1 of 40Imola Red produced for NA , ESS 455 Supercharger, Speedhut Gauges, VPM CLS wheels, 19" Hancooks, Stromung Exhaust, Carbon fibre accessories and black and white badging,
|
Post Reply |
Bookmarks |
|
|