Used RacingBrake RB460 & RB24, 4F/2R BBK + spare parts/pads from Z4M

mimarcos · 10-28-2023, 10:33 PM

BIMMERPOST / Classifieds

Asking Price:

Sold

Or Best Offer

Item Interest

Hi there all. I have a variety of parts (I believe they're all there including an extra caliper, some extra rotor rings, a couple different pads, SS brake lines, might be missing some hardware) for a 4-piston front, 2-piston rear BBK from RacingBrake.

Specifically, I believe the PNs and parts are as follows:

RB460 front calipers: https://racingbrake.com/rb460/
RB24 rear calipers: https://racingbrake.com/rb24/
XT970 front pads (2 sets)
XR70 front pads (1 set)
XT960 rear pads (2 sets)
XR70 rear pads (1 set)
Rotors front (2 complete)
Rotors rear (2 complete)
Additional rotor rings, I believe I have one for each corner, will confirm if there's interest.

The pads are a mix of barely used or new (mostly brand new). I can get more specifics or photos if desired. Truth be told, I had a really poor experience with these. Call it lack of experience with track braking at that point in my hobby, but my life got far better getting the OE calipers and some nice track pads. These have mostly just sat around after I went back to OE + track pads doing absolutely nothing. The whole kit originally cost, I believe, around $4k, don't remember the actual figure offhand. I remember reading rave reviews from some forum members when I first purchased, but they just weren't for me.

I've taken pictures of just about all of the parts. I can clean them with brake cleaner before I ship them if desired. I can also take additional photos if desired. They aren't in the best cosmetic shape and you may need new piston seals. Photos are on Google Photos here:

https://photos.app.goo.gl/sPnx2iJv1eQ13shg7

Asking price here for the whole kit and caboodle is $1500 + shipping. I honestly have no idea if this is a deal or they're not worth that much at this point but I think that's where I'm at on price. As far as applications on your specific vehicle, you'll have to do your homework. They, at a minimum, fit on my car.

I will try to be responsive but I haven't been a very active forum member in a while, so if it takes me some time to respond, please bear with me. Thanks!

D3F3NDER · 10-29-2023, 08:09 AM

You have a PM

mimarcos · 10-29-2023, 01:49 PM

Quote:

Originally Posted by D3F3NDER

You have a PM

You do as well

mimarcos · 10-31-2023, 07:55 AM

Still available.

dre99gsx · 11-01-2023, 03:50 PM

Front and rear rotor diameter and width?

mimarcos · 11-02-2023, 12:56 PM

Front is 348x30mm and rear is 330x22mm.

I am quoting those figures off what I believe was the original kit I purchased - I will confirm the measurements later tonight.

mimarcos · 11-14-2023, 11:07 AM

Price dropped to $1,000.

06ZM · 12-05-2023, 10:39 AM

Still for sale?

mimarcos · 02-09-2024, 09:25 PM

Ah, I'm so sorry, these sold a while back and I didn't update the listing. Stopped checking here since there wasn't a ton of activity.

10-28-2023, 10:33 PM	#1
mimarcos Private 5 Rep 65 Posts Drives: 2006 Z4MR, 2017 S3 APR1 Join Date: Apr 2012 Location: Dallas, PA iTrader: (0)	Used RacingBrake RB460 & RB24, 4F/2R BBK + spare parts/pads from Z4M BIMMERPOST / Classifieds Asking Price: Sold Or Best Offer Item Interest Hi there all. I have a variety of parts (I believe they're all there including an extra caliper, some extra rotor rings, a couple different pads, SS brake lines, might be missing some hardware) for a 4-piston front, 2-piston rear BBK from RacingBrake. Specifically, I believe the PNs and parts are as follows: RB460 front calipers: https://racingbrake.com/rb460/ RB24 rear calipers: https://racingbrake.com/rb24/ XT970 front pads (2 sets) XR70 front pads (1 set) XT960 rear pads (2 sets) XR70 rear pads (1 set) Rotors front (2 complete) Rotors rear (2 complete) Additional rotor rings, I believe I have one for each corner, will confirm if there's interest. The pads are a mix of barely used or new (mostly brand new). I can get more specifics or photos if desired. Truth be told, I had a really poor experience with these. Call it lack of experience with track braking at that point in my hobby, but my life got far better getting the OE calipers and some nice track pads. These have mostly just sat around after I went back to OE + track pads doing absolutely nothing. The whole kit originally cost, I believe, around $4k, don't remember the actual figure offhand. I remember reading rave reviews from some forum members when I first purchased, but they just weren't for me. I've taken pictures of just about all of the parts. I can clean them with brake cleaner before I ship them if desired. I can also take additional photos if desired. They aren't in the best cosmetic shape and you may need new piston seals. Photos are on Google Photos here: https://photos.app.goo.gl/sPnx2iJv1eQ13shg7 Asking price here for the whole kit and caboodle is $1500 + shipping. I honestly have no idea if this is a deal or they're not worth that much at this point but I think that's where I'm at on price. As far as applications on your specific vehicle, you'll have to do your homework. They, at a minimum, fit on my car. I will try to be responsive but I haven't been a very active forum member in a while, so if it takes me some time to respond, please bear with me. Thanks! __________________ 2006 Z4M (Emmy), 2018 WRX 50th Anniversary, and former 2013 335is Coupe, 2012 S4 (Meli), 2008 328xi (Lucy) and 2004 X3 2.5i (Scar) Last edited by mimarcos; 11-14-2023 at 11:07 AM..
	Appreciate 0 Tweet Quote

10-29-2023, 08:09 AM	#2
D3F3NDER New Member 2 Rep 19 Posts Drives: 07 Z4 M coupe 03 Honda S2000 Join Date: Dec 2022 Location: Florida iTrader: (0)	You have a PM
	Appreciate 0 Quote

10-31-2023, 07:55 AM	#4
mimarcos Private 5 Rep 65 Posts Drives: 2006 Z4MR, 2017 S3 APR1 Join Date: Apr 2012 Location: Dallas, PA iTrader: (0)	Still available. __________________ 2006 Z4M (Emmy), 2018 WRX 50th Anniversary, and former 2013 335is Coupe, 2012 S4 (Meli), 2008 328xi (Lucy) and 2004 X3 2.5i (Scar)
	Appreciate 0 Quote

11-01-2023, 03:50 PM	#5
dre99gsx Captain 510 Rep 911 Posts Drives: 1994 Toyota Supra Join Date: Aug 2011 Location: NJ iTrader: (2)	Front and rear rotor diameter and width? __________________ Andre - 2J into a Z4 Coupe!
	Appreciate 0 Quote

11-02-2023, 12:56 PM	#6
mimarcos Private 5 Rep 65 Posts Drives: 2006 Z4MR, 2017 S3 APR1 Join Date: Apr 2012 Location: Dallas, PA iTrader: (0)	Front is 348x30mm and rear is 330x22mm. I am quoting those figures off what I believe was the original kit I purchased - I will confirm the measurements later tonight. __________________ 2006 Z4M (Emmy), 2018 WRX 50th Anniversary, and former 2013 335is Coupe, 2012 S4 (Meli), 2008 328xi (Lucy) and 2004 X3 2.5i (Scar)
	Appreciate 0 Quote

11-14-2023, 11:07 AM	#7
mimarcos Private 5 Rep 65 Posts Drives: 2006 Z4MR, 2017 S3 APR1 Join Date: Apr 2012 Location: Dallas, PA iTrader: (0)	Price dropped to $1,000. __________________ 2006 Z4M (Emmy), 2018 WRX 50th Anniversary, and former 2013 335is Coupe, 2012 S4 (Meli), 2008 328xi (Lucy) and 2004 X3 2.5i (Scar)
	Appreciate 0 Quote

12-05-2023, 10:39 AM	#8
06ZM Registered 0 Rep 3 Posts Drives: Z4M Roadster Join Date: Jul 2023 Location: Wisconsin iTrader: (0)	Still for sale? Last edited by 06ZM; 02-27-2024 at 02:16 PM..
	Appreciate 0 Quote

02-09-2024, 09:25 PM	#9
mimarcos Private 5 Rep 65 Posts Drives: 2006 Z4MR, 2017 S3 APR1 Join Date: Apr 2012 Location: Dallas, PA iTrader: (0)	Ah, I'm so sorry, these sold a while back and I didn't update the listing. Stopped checking here since there wasn't a ton of activity. __________________ 2006 Z4M (Emmy), 2018 WRX 50th Anniversary, and former 2013 335is Coupe, 2012 S4 (Meli), 2008 328xi (Lucy) and 2004 X3 2.5i (Scar)
	Appreciate 0 Quote