WTB: Tire Pressure Sensor

[Reborn_]

Looking for one (1) tire pressure sensor. Must be functional. Preferably oem, but as long as it works with the Z, I'm interested. I'm located in 92691. Thanks.

[inTgr8r]

I would caution you buying a used OE at this point.

The cars and are 10 years old now, that's the expected life cycle for these.
You might put one in only to do it again in a few weeks/months.

I had 4 sitting in the parts drawer & I tossed them in the bin.

[Reborn_]

Originally Posted by inTgr8r

I would caution you buying a used OE at this point.

The cars and are 10 years old now, that's the expected life cycle for these.
You might put one in only to do it again in a few weeks/months.

I had 4 sitting in the parts drawer & I tossed them in the bin.

Fair point, but I figured some people out there may have them sitting on old wheels or in the drawer and want to make a buck. I'm not concerned if the unit has little use on it, even if it's 10 years old. Looks like nobody has one anyway, so I'll have to buy a new one.

[3002 tii]

Originally Posted by Reborn_

Fair point, but I figured some people out there may have them sitting on old wheels or in the drawer and want to make a buck. I'm not concerned if the unit has little use on it, even if it's 10 years old. Looks like nobody has one anyway, so I'll have to buy a new one.

Or code them out... makes things so much easier.

[inTgr8r]

Originally Posted by 3002 tii

Or code them out... makes things so much easier.

[Calichase]

Originally Posted by 3002 tii

Or code them out... makes things so much easier.

What's the best way to go about doing this?

[Reborn_]

Originally Posted by Calichase

What's the best way to go about doing this?

Read this thread from start to finish:
http://www.e90post.com/forums/showthread.php?t=1204192

I think I posted in there, but everyone has verified the bi**ersoftw*re dot com cable to be functional with our gen vehicles, but I could never get it to to connect to my E86. I got INPA and everything setup perfectly. 3002tii, intgr8r, if you guys have some insight into the cable, I'd love to hear it. I gave up on it a while back and never got around to trying to identify a new cable to try.

[3002 tii]

Originally Posted by Reborn_

Read this thread from start to finish:
http://www.e90post.com/forums/showthread.php?t=1204192

I think I posted in there, but everyone has verified the bi**ersoftw*re dot com cable to be functional with our gen vehicles, but I could never get it to to connect to my E86. I got INPA and everything setup perfectly. 3002tii, intgr8r, if you guys have some insight into the cable, I'd love to hear it. I gave up on it a while back and never got around to trying to identify a new cable to try.

Are you sure it's not a software installation issue or the port settings?

I've used both the generic k+dan cables from eBay as well as the high quality one from BimmerGeeks.

[Reborn_]

Originally Posted by 3002 tii

Are you sure it's not a software installation issue or the port settings?

I've used both the generic k+dan cables from eBay as well as the high quality one from BimmerGeeks.

Pretty sure. wildcatcrazy even remoted in to double check all of that and verified it was good. I suppose I could try a fresh install and configuration just in case.